Baumer GI356

Incremental encoders

The GI356 is equipped with a solid shaft with a diameter of 10 mm or 6 mm and can be equipped with a clamping or synchronous flange. It uses an optical reading method and supports up to 6000 pulses per revolution.

Datasheet:

• Supply voltage: 5 VDC ±10%, 4.75...30 VDC, 10...30 VDC
• Reverse polarity protection: Yes (4.75...30 VDC)
• No-load consumption: ≤30 mA (24 VDC), ≤60 mA (5 VDC)
• Pulses per revolution: 5 ... 6000
• Output signal frequency: ≤150 kHz
• Output signals: A 90° B, N + inverted
• Output stages: Line driver/RS422, push-pull with short circuit protection
• Interference resistance: EN 61000-6-2
• Radiated interference: EN 61000-6-4
• Permissible load on the shaft: ≤20 N axial, ≤40 N radial
• Protection: EN 60529 IP 54 (without shaft seal), IP 65 (with shaft seal)
• Rotation speed: ≤10000 rpm
• Starting torque: ≤0.015 Nm (+25 °C, IP 54), ≤0.03 Nm (+25 °C, IP 65)
• Rotor moment of inertia: 14.5 gcm²
• Material: Housing - aluminum, Flange - aluminum
• Operating temperature: -25...+100 °C (5 VDC), -25...+85 °C (24 VDC), -40...+85 °C (optional)
• Relative humidity: 95 % non-condensing
• Vibration resistance: EN 60068-2-6, 10 g, 16-2000 Hz
• Impact resistance: EN 60068-2-27, 200 g, 6 ms
• Connections: M23 connector, 12-pin, 1 m cable
• Weight: approx. 250 g.

Advantages:

• High accuracy: Thanks to the optical reading method, high measurement accuracy is ensured.
• Reliability: High level of protection against dust and moisture (IP 65 with shaft seal).
• Flexibility: A choice of different flange types and shaft diameters.
• Wide operating temperature range: Suitable for use in a variety of operating conditions.
• High rotational speed: Supports speeds up to 10000 rpm