Baumer HOG 100

Incremental encoder

The HOG 100 incremental encoders are equipped with an optical reading method and are available with a 16 mm diameter blind hollow shaft or a 17 mm diameter tapered shaft (1:10).

Datasheet:

• Supply voltage: 9...30 VDC or 5 VDC ±5%.
• No-load consumption: ≤100 mA
• Pulses per revolution: from 1024 to 10000
• Phase shift: 90° ±8°
• Duty cycle: 44...56 %
• Reference signal: Zero pulse, 90° width
• Output frequency: ≤250 kHz
• Output signals: K1, K2, K0 + inverted
• Output stages: HTL, TTL/RS422
• Interference resistance: EN 61000-6-2
• Radiated interference: EN 61000-6-3
• Size (flange): ø105 mm
• Shaft type: ø16 mm (blind hollow shaft), ø17 mm (1:10 tapered shaft)
• Permissible load on the shaft: ≤450 N axial, ≤600 N radial
• Protection: EN 60529 IP 66
• Operating speed: ≤10000 rpm (mechanical)
• Operating torque: approx. 6 Ncm
• Rotor moment of inertia: 320 gcm²
• Material: Housing - die-cast aluminum, Shaft - stainless steel
• Operating temperature: -30...+85 °C
• Vibration resistance: IEC 60068-2-6 Vibration 20 g, 10-2000 Hz
• Impact resistance: IEC 60068-2-27 Impact 300 g, 6 ms
• Corrosion protection: IEC 60068-2-52 Salt spray for environmental conditions C4 according to ISO 12944-2
• Explosion protection: II 3 G Ex ec IIC T4 Gc (gas), II 3 D Ex tc IIIC T135°C Dc (dust) (only with ATEX option)
• Connection: Terminal box, Terminal box cover
• Weight: approx. 1.5 kg