Baumer HOG 165 + DSL.E

Incremental encoders - combination

The Baumer HOG 165 + DSL.E is a combined incremental encoder with programmable digital speed switch. This encoder uses an optical measurement method and is ideal for industrial applications where precision and robustness are required.

Datasheet

Electrical Specifications:

• Supply voltage: 9...30 VDC
• No-load consumption: ≤200 mA
• Number of pulses per revolution: 512...4096
• Phase shift: 90° ± 20°
• Torque range: 40...60 %
• Counting signal: Zero pulse, 90° width
• Output frequency: ≤120 kHz
• Output signals: K1, K2, K0 + inverted
• Output stages: HTL, TTL/RS422
• Interference resistance: EN 61000-6-2
• Radiated interference: EN 61000-6-3
• Approvals: CE, UL approval

Mechanical design:

• Size (flange): ø165 mm
• Shaft type: ø25 mm (through hollow shaft)
• Permissible shaft load: ≤500 N axial, ≤650 N radial
• Protection according to EN 60529: IP 67
• Operating speed: ≤6000 rpm
• Operating torque: typically 15 Ncm
• Rotor moment of inertia: 4.9 kgcm²
• Material: Housing: aluminum alloy, shaft: stainless steel
• Operating temperature: -30...+85 °C
• Vibration: IEC 60068-2-6, 20 g, 10-2000 Hz
• Shock: IEC 60068-2-27, 300 g, 6 ms
• Corrosion resistance: IEC 60068-2-52, salt spray for environmental conditions CX (C5-M) according to ISO 12944-2
• Protection against explosion: II 3 G Ex ec IIC T4 Gc (gas), II 3 D Ex tc IIIC T135°C Dc (dust) (only with ATEX option)
• Connection: Terminal box
• Weight: approx. 4.2 kg