Baumer ITD 20 A 4 Y130
Incremental encoders
We ship to United States of America!
| Voltage supply | 5 VDC ±5 % 8...30 VDC |
| Reverse polarity protection | Yes |
| Consumption w/o load | ≤100 mA |
| Operating temperature | -20...+70 °C -20...+100 °C |
Item Number:
ITD 20 A 4 Y130
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
The price and delivery terms is not final. Please check with the manager.
Contact our experts
- Overview +
- Comments +
| Weight approx. | 280 g |
| Operating speed | ≤8000 rpm ≤5000 rpm IP 65 (>70 °C) |
| Protection DIN EN 60529 | IP 65 |
| Output stages | TTL linedriver (short-circuit proof) HTL push-pull (short-circuit proof) |
| Connection | Connector M23 type 2, 12-pin |
| Voltage supply | 5 VDC ±5 % 8...30 VDC |
| Pulses per revolution | 50...1024 |
| Consumption w/o load | ≤100 mA |
| Sensing method | Optical |
| Mounting kit | 044 |
| ITD 20 A 4 Y130 output signals | A, B, N + inverted |
| Motor shaft tolerance | 0.25 mm axial 0.1 mm radial |
| Operating temperature | -20...+70 °C -20...+100 °C |
| Resistance | DIN EN 60068-2-6 Vibration 10 g, 55-2000 Hz DIN EN 60068-2-27 Shock 100 g, 11 ms |
| Reverse polarity protection | Yes |
| Starting torque | ≤0.01 Nm (+20 °C) |
| manufacter SKU | ITD 20 A 4 Y130 |
| Reference signal | Zero pulse, width 90° |
| Shaft type | ø12 mm (blind hollow shaft) |
| Size (flange) | ø58 mm |
| Relative humidity | 90 % non-condensing |
| Materials | Housing: aluminium, black, powder-coated Shaft: stainless steel |
| Emitted interference | DIN EN 61000-6-3 |
| Output frequency | ≤120 kHz |
| Interference immunity | DIN EN 61000-6-2 |
Buy Baumer ITD 20 A 4 Y130 with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. is a world-known industrial automation supplier. We have a lot of products in stock. We deliver to any country in the world. We will give you a valuable offer. We always reply to queries and give feedback. We understand your needs and constantly strive to work more efficiently to solve them.
Comments
No comments yet