Baumer ITD 20 B14 Y 1 Incremental encoders
Item Number: ITD 20 B14 Y 1
| Voltage supply | 5 VDC ±5 % 8...30 VDC |
| Reverse polarity protection | Yes |
| Consumption w/o load | ≤100 mA |
| Operating temperature | -20...+70 °C -20...+100 °C |
- Overview
- Datasheet
- Alternative numbers
- Comments
| manufacter SKU | ITD 20 B14 Y 1 |
| Shaft type | ø6 mm solid shaft |
| Voltage supply | 5 VDC ±5 % 8...30 VDC |
| Sensing method | Optical |
| ITD 20 B14 Y 1 output signals | A, B, N + inverted |
| Protection DIN EN 60529 | IP 65 |
| Relative humidity | 90 % non-condensing |
| Emitted interference | DIN EN 61000-6-3 |
| Connection | Connector M23 type 2, 12-pin |
| Admitted shaft load | ≤20 N axial ≤40 N radial |
| Starting torque | ≤0.01 Nm (+20 °C) |
| Operating temperature | -20...+70 °C -20...+100 °C |
| Consumption w/o load | ≤100 mA |
| Pulses per revolution | 50...1024 |
| Reference signal | Zero pulse, width 90° |
| Weight approx. | 240 g |
| Output frequency | ≤120 kHz |
| Reverse polarity protection | Yes |
| Materials | Housing: aluminium, black, powder-coated Shaft: stainless steel |
| Flange | Synchro flange |
| Operating speed | ≤12000 rpm |
| Size (flange) | ø58 mm |
| Interference immunity | DIN EN 61000-6-2 |
| Output stages | TTL linedriver (short-circuit proof) HTL push-pull (short-circuit proof) |
| Resistance | DIN EN 60068-2-6 Vibration 10 g, 55-2000 Hz DIN EN 60068-2-27 Shock 100 g, 11 ms |
Comments
No comments yet