Baumer ITD 21 A 4 Y10 Incremental encoders
Item Number: ITD 21 A 4 Y10
| Voltage supply | 5 VDC ±5 % 8...30 VDC |
| Reverse polarity protection | Yes |
| Consumption w/o load | ≤100 mA |
| Operating temperature | -20...+70 °C -30...+70 °C |
- Overview
- Datasheet
- Alternative numbers
- Comments
| Shaft type | ø6...16 mm (blind hollow shaft) |
| Output stages | TTL linedriver (short-circuit proof) HTL push-pull (short-circuit proof) |
| Weight approx. | 430 g |
| Connection | Connector M23 type 2, 12-pin |
| Size (flange) | ø58 mm |
| Pulses per revolution | 1000...10000 |
| Operating temperature | -20...+70 °C -30...+70 °C |
| Motor shaft tolerance | 0.25 mm axial 0.5 mm radial |
| Operating speed | ≤8000 rpm |
| Sensing method | Optical |
| Voltage supply | 5 VDC ±5 % 8...30 VDC |
| Relative humidity | 90 % non-condensing |
| manufacter SKU | ITD 21 A 4 Y10 |
| Reference signal | Zero pulse, width 90° |
| Interference immunity | DIN EN 61000-6-2 |
| Starting torque | ≤0.01 Nm (+20 °C) |
| Consumption w/o load | ≤100 mA |
| ITD 21 A 4 Y10 output signals | A, B, N + inverted |
| Output frequency | ≤300 kHz (TTL) ≤160 kHz (HTL) |
| Emitted interference | DIN EN 61000-6-3 |
| Materials | Housing: aluminium, black, powder-coated Shaft: stainless steel |
| Reverse polarity protection | Yes |
| Protection DIN EN 60529 | IP 65 |
| Resistance | DIN EN 60068-2-6 Vibration 10 g, 55-2000 Hz DIN EN 60068-2-27 Shock 30 g, 11 ms |
Comments
No comments yet