Baumer ITD 4 B10

Incremental encoder

Baumer ITD 4 B10 is a high-precision incremental encoder with an optical measurement method, designed for use in industrial environments where high accuracy and reliability are required. Thanks to its design and the use of quality materials, this encoder ensures long-term operation and high resistance to environmental influences.

Datasheet

Electrical characteristics:

• Supply voltage: 5 VDC ±5 %, 8...30 VDC
• Reverse polarity protection: Yes
• No-load consumption: ≤100 mA
• Steps per revolution: 200 ... 2048
• Reference signal: Zero pulse, width 90°
• Measurement method: Optical
• Output frequency: ≤120 kHz
• Output signals: A, B, N + inverse
• Output stages: TTL line driver (short-circuit protected), HTL push-pull (short-circuit protected)
• Immunity to interference: EN 61000-6-2
• Radiated interference: EN 61000-6-3

Mechanical design:

• Size (flange): ø115 mm
• Shaft type: ø11 mm solid shaft
• Permissible load on the shaft: ≤40 N axial, ≤60 N radial
• Flange: EURO flange B10
• Protection EN 60529: IP 65
• Operating speed: ≤12000 rpm
• Starting torque: ≤0.012 Nm (+20 °C)
• Material: Body: aluminum; Shaft: stainless steel
• Operating temperature: -20...+70 °C, -20...+100 °C
• Relative humidity: 90% non-condensing
• Resistance: EN 60068-2-6, Vibration 10 g, 55-2000 Hz; EN 60068-2-27, Impact 100 g, 11 ms
• Connection: Cable 1 m
• Weight: approximately 850 g

Advantages:

• High accuracy: Provides accurate position measurement in steps per revolution from 200 to 2048.
• Resistance to vibrations and shocks: High resistance to vibrations and shocks ensures reliability in difficult industrial environments.
• Optical measurement method: Provides high reliability and measurement accuracy.
• Protection IP 65: Ensures long-lasting operation even in harsh conditions.