Baumer ITD61H00 Incremental encoders
Item Number: ITD61H00
| Voltage supply | 8...30 VDC 4.75...30 VDC |
| Reverse polarity protection | Yes |
| Consumption w/o load | ≤100 mA |
| Operating temperature | -20...+70 °C |
- Overview
- Datasheet
- Alternative numbers
- Comments
| manufacter SKU | ITD61H00 |
| Voltage supply | 8...30 VDC 4.75...30 VDC |
| Sensing method | Optical |
| Emitted interference | DIN EN 61000-6-3 |
| Connection | Cable 1 m Connector M23 type 2, 12-pin |
| Output stages | Push-pull short-circuit proof |
| Size (flange) | ø120 mm |
| Operating speed | ≤4000 rpm |
| Shaft type | ø30...50 mm (through hollow shaft) |
| Pulses per revolution | 1024...10000 |
| Output frequency | ≤300 kHz (UB = 5 VDC, at 4.75...30 VDC) ≤160 kHz (UB > 5 VDC, at 4.75...30 VDC) ≤300 kHz (at 8...30 VDC) |
| Reference signal | Zero pulse, width 90° |
| Protection DIN EN 60529 | IP 54 |
| Resistance | DIN EN 60068-2-6 Vibration 10 g, 55-2000 Hz DIN EN 60068-2-27 Shock 30 g, 11 ms |
| Approval | UL 508 / CSA 22.2 |
| Reverse polarity protection | Yes |
| Relative humidity | 90 % non-condensing |
| Consumption w/o load | ≤100 mA |
| Operating temperature | -20...+70 °C |
| ITD61H00 output signals | A, B, N + inverted |
| Materials | Housing: stainless steel Shaft: stainless steel |
| Motor shaft tolerance | 0.5 mm axial 0.1 mm radial |
| Weight approx. | 2000 g |
| Interference immunity | DIN EN 61000-6-2 |
| Mounting kit | 051 058 |
Comments
No comments yet