Baumer ITD69H00 - Rectangular signal

Magnetic ring encoder

The Baumer ITD 69H00 Rectangular Signal is an incremental encoder without a reference feed, designed for industrial applications where high accuracy and reliability are required. This encoder uses a magnetic disk to measure position, which provides high resistance to dust and vibration.

Datasheet

Electrical characteristics:

• Supply voltage: 5 VDC ±5 %, 8...26 VDC
• Reverse polarity protection: Yes
• No-load consumption: ≤50 mA
• Steps per revolution: 128 ... 4096
• Reference signal: Zero pulse, width 90°
• Measurement method: Magnetic
• Output frequency: ≤300 kHz (TTL), ≤160 kHz (HTL)
• Output signals: A 90°, B \u002B inverse, A 90°, B, N \u002B inverse
• Output stages: TTL line driver (short-circuit protected), HTL push-pull (short-circuit protected)
• Immunity to interference: EN 61000-6-2
• Radiated interference: EN 61000-6-3

Mechanical design:

• Shaft type: Through hollow shaft, ø40...68 mm
• Size: 12 x 16 x 48 mm
• Protection EN 60529: IP 67
• Operating speed: ≤10,000 rpm
• Material: Body: plastic; Shaft: stainless steel 1.4104
• Operating temperature: -40...+100 °C
• Relative humidity: 90% non-condensing
• Resistance: EN 60068-2-6, Vibration 10 g, 55-2000 Hz; EN 60068-2-27, Impact 100 g, 11 ms
• Connection: Cable 1 m
• Weight: approximately 390 g

Advantages:

• High accuracy: Provides accurate position measurement from 128 to 4096 steps per revolution.
• Dust and vibration resistance: High dust and vibration resistance ensures reliability in difficult industrial environments.
• Option without support feed: No support feed reduces wear and increases service life.
• Ease of installation: Quick, easy and economical installation.
• Protection IP 67: Ensures long-lasting operation even in harsh conditions.