Baumer ITD69H00 - Sine signal Magnetic ring encoder
Item Number: ITD69H00 - Sine signal
Magnetic ring encoder with sine signal
| Voltage supply | 5 VDC ±10 % |
| Consumption w/o load | ≤50 mA |
| Sinewave cycles per turn | 128 |
| Operating temperature | -40...+100 °C (fixed cable) |
- Overview
- Datasheet
- Alternative numbers
- Comments
Magnetic ring encoder with sine signal, Through hollow shaft 20 ... 68 mm
| Resistance | DIN EN 60068-2-6 Vibration 10 g, 55-2000 Hz DIN EN 60068-2-27 Shock 100 g, 11 ms |
| Reverse polarity protection | Yes |
| Interpolation | 1fold (single) 2fold 4fold 8fold 16fold 32fold |
| Dimensions W x H x L | 12 x 16 x 48 mm |
| Materials | Housing: plastic Shaft: stainless steel |
| Consumption w/o load | ≤50 mA |
| Sinewave cycles per turn | 128 |
| Motor shaft tolerance | 0.5 mm axial 0.05 mm radial |
| ITD69H00 sine output signals | A 90° B, 0 A 90° B, N + inverted |
| Protection DIN EN 60529 | IP 67 (relating to sealed electronics) |
| System accuracy | ±0.2° |
| Short-circuit proof | Yes |
| Connection | Cable 1 m |
| Operating temperature | -40...+100 °C (fixed cable) |
| Emitted interference | DIN EN 61000-6-3 |
| Weight approx. | 390 g |
| Admitted cable length | 15 m |
| Interference immunity | DIN EN 61000-6-2 |
| Output stages | SinCos 1 Vpp |
| Shaft type | ø20...68 mm (through hollow shaft) |
| Voltage supply | 5 VDC ±10 % |
| Operating speed | ≤15000 rpm |
| manufacter SKU | ITD69H00 sine |
| Output frequency | ≤180 kHz (-3 dB) |
Comments
No comments yet