Baumer KTD 4-... A 4 Y10

Tachogenerator

The Baumer KTD 4-... A 4 Y10 is a tachogenerator with an optical measurement method, designed for industrial applications where high accuracy and reliability are required. This tachogenerator uses an optical method to measure revolutions, which ensures high resistance to dust and vibrations.

Datasheet

Electrical characteristics:

• Supply voltage: 10...30 VDC
• Reverse polarity protection: Yes
• No-load consumption: ≤70 mA (24 VDC)
• Steps per revolution: 32,768 (15 bits)
• Measurement method: Optical
• Output frequency: ≤300 kHz (TTL), ≤160 kHz (HTL)
• Output signals: A, B, N + inverse
• Output stages: TTL line driver (short-circuit protected), HTL push-pull (short-circuit protected)
• Immunity to interference: EN 61000-6-2
• Radiated interference: EN 61000-6-3

Mechanical design:

• Operating speed: ≤5000 rpm (mechanical), ≤7000 rpm (electric)
• Starting torque: ≤0.03 Nm (+20 °C)
• Material: Body: aluminum, black, powder coated; Shaft: stainless steel
• Operating temperature: -20...+85 °C
• Relative humidity: 90% non-condensing
• Resistance: EN 60068-2-6, Vibration 10 g, 55-2000 Hz; EN 60068-2-27, Impact 30 g, 11 ms
• Connection: Cable 1 m
• Weight: approximately 700 g

Advantages:

• High Accuracy: Provides accurate revolution measurement with 32.768 steps per revolution.
• Resistance to vibrations and shocks: High resistance to the effects of vibrations and shocks ensures reliability in difficult industrial conditions.
• Optical measurement method: Provides high reliability and measurement accuracy.
• Protection IP 65: Ensures long-lasting operation even in harsh conditions.