Baumer MA20

Incremental encoder

The Baumer MA20 is a high-precision incremental encoder with an optical measurement method, designed for industrial applications where high accuracy and reliability are required. This encoder uses a measuring wheel to ensure accurate rotation measurement, making it resistant to dust and vibration.

Datasheet

Electrical characteristics:

• Supply voltage: 4.75...30 VDC
• No load consumption: 100 mA (24 VDC, no load)
• Steps per revolution: 100 ... 25000
• Measurement method: Optical
• Output frequency: ≤300 kHz
• Output signals: A 90°, B
• Output stages: Push-pull antivalent, protected against short circuit (HTL)
• Immunity to interference: EN 61000-6-2
• Radiated interference: EN 61000-6-3

Mechanical design:

• Size (flange): ø40 mm
• Shaft type: ø6 mm solid shaft
• Protection EN 60529: IP 64
• Operating speed: ≤3000 rpm
• Starting torque: 0.0075 Nm (3000 rpm, +20 °C)
• Material: Encoder housing: aluminum; Measuring lever: aluminum/steel; Measuring wheel: aluminum/NBR
• Operating temperature: -20...+85 °C
• Relative humidity: 95% non-condensing
• Resistance: EN 60068-2-6, Vibration 10 g, 10-200 Hz; EN 60068-2-27, Impact 50 g, 11 ms
• Connection: M12 connector, 8-pin, 2 m cable
• Weight: about 100 g

Advantages:

• High Accuracy: Provides accurate RPM measurement in 100 to 25,000 RPM increments.
• Resistance to vibrations and shocks: High resistance to the effects of vibrations and shocks ensures reliability in difficult industrial conditions.
• Optical measurement method: Provides high reliability and measurement accuracy.
• Protection IP 64: Ensures long-lasting operation even in harsh conditions.