Baumer EAM360-S - SSI MAGRES
Solid shaft encoder with synchro flange
- Encoder single- or multiturn / SSI
- Precise magnetic sensing
- Angular accuracy up to В±0.15В°
- Resolution max. 32 bit (14 bit ST, 18 bit MT)
- Additional incremental signals
- Clock frequency up to 2 MHz
- High protection up to IP 67
- High resistance to shock and vibrations
Item Number:
EAM360-S - SSI MAGRES
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Baumer Article no | 10106004 |
| Voltage supply | 4.5...30 VDC (SSI, SSI + TTL/RS422)5.5...30 VDC (SSI + HTL/Push-pull) |
| Consumption typ. | 60 mA (5 VDC, w/o load)20 mA (24 VDC, w/o load) |
| Initializing time | ? 170 ms after power on |
| Data currency | Typ. 2 Вµs (cyclic request) |
| Interface | SSISSI + incremental |
| Function | MultiturnSingleturn |
| Operating mode | Linear feedback shift register (on request) |
| Steps per revolution | ?16384 / 14В bit |
| Number of revolutions | ?262144 / 18В bit |
| Absolute accuracy | В±0.15 В° (+20 В±15 В°C)В±0.25 В° (-40...+85 В°C) |
| Sensing method | Magnetic |
| Code | Gray or binary |
| Code sequence | CW: ascending values with clockwise sense of rotation; looking at flange |
| Inputs | SSI clock: Linereceiver RS422Zero setting inputCounting direction |
| Output stages | SSI data: Linedriver RS422Incremental: linedriver RS422 or push-pull (option) |
| Incremental output | 1024, 2048, 4096 ppr (other on request) |
| Output signals | A+, A-, B+, B- |
| Output frequency | ?350 kHz |
| Interference immunity | EN 61000-6-2 |
| Emitted interference | EN 61000-6-4 |
| Diagnostic function | DATAVALID (on request) |
| Approval | UL approval / E217823 |
| Size (flange) | Гё36В mm |
| Shaft type | Гё10 x 16В mm, solid shaft with flat |
| Flange | Synchro flange |
| ProtectionВ ENВ 60529 | IP 65 (without shaft seal)IPВ 67В (withВ shaftВ seal) |
| Operating speed | ?6000 rpm |
| Starting torque | ?2 Ncm (+20 В°C, IP 65)?2.5 Ncm (+20 В°C, IP 67) |
| Moment of inertia | 15.38 gcmВІ |
| Admitted shaft load | ?40 N axial?80 N radial |
| Material | Housing: steel zinc-coatedFlange: aluminiumShaft: stainless steel |
| Operating temperature | -40...+85В В°C (seeВ generalВ information) |
| Relative humidity | 95 % |
| Resistance | EN 60068-2-6Vibration 30В g, 10-2000 HzEN 60068-2-27Shock 500 g, 1 ms |
| Weight approx. | 170 g |
| Connection | Flange connector M12, 8-pinFlange connector M12, 12-pinCable 2 m |
Comments
No comments yet