Baumer MHGE 200 - HDmag Incremental encoders
Item Number: MHGE 200 - HDmag
| Interference immunity | EN 61000-6-2 |
| Emitted interference | EN 61000-6-3 |
| Approvals | CE Option: DNV approval |
| Operating temperature | -40...+100 °C |
- Overview
- Datasheet
- Alternative numbers
- Comments
| Phase shift | 90° ±10° |
| manufacter SKU | MHGE 200 - HDmag |
| Difference of SinCos amplitude | ≤20 mV |
| Output stages | HTL TTL/RS422 |
| MHGE 200 - HDmag output signals | A+, B+, R+, A-, B-, R- |
| Output stages | SinCos 1 Vpp |
| Connection | Flange connector M23, 12-pin |
| MHGE 200 - HDmag output signals | A+, B+, R+, A-, B-, R- |
| Resistance | IEC 60068-2-6 Vibration 30 g, 55-2000 Hz IEC 60068-2-27 Shock 300 g, 2 ms |
| DC offset | ≤20 mV |
| Interference immunity | EN 61000-6-2 |
| Sensor head | Standard signal processing |
| Emitted interference | EN 61000-6-3 |
| Size (flange) | ø201.7 mm |
| Phase shift | 90° ±5° |
| Approvals | CE Option: DNV approval |
| Pulses per revolution | 128...8192 |
| Scan ratio | 40...60 % |
| Operating speed | ≤4000 rpm |
| Shaft type | ø50...180 mm (through hollow shaft) |
| Accuracy of magnetic measure | ±150 ' |
| Reference signal | Zero pulse, width 90° |
| Voltage supply | 4.75...30 VDC |
| Sensing method | Magnetic |
| Protection DIN EN 60529 | IP 67 (head) IP 68 (wheel) |
| Radial tolerance | 0.1...2.2 mm (wheel/head) |
| Sinewave cycles per turn | 128 |
| Operating temperature | -40...+100 °C |
| Sensing method | Magnetic |
| Consumption w/o load | ≤70 mA |
| Voltage supply | 5 VDC |
| Consumption w/o load | ≤70 mA |
| Harmonics typ. | -40 dB |
| Reference signal | Zero pulse, width 90° |
| Output frequency | ≤300 kHz |
| Axial tolerance | ±3 mm (wheel/head) |
Comments
No comments yet