Baumer MIR 350A - HDmag flex
Bearingless Magnetic ring encoder HeavyDuty
Sensor head with split wheel and magnetic tape for shaft 90...300 mm
| Voltage supply | 4.75...30 VDC |
| Consumption w/o load | ≤300 mA (24 VDC) |
| Sensing method | Magnetic |
| Operating temperature | -40...+85 °C |
Item Number:
MIR 350A - HDmag flex
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
- Encoder without bearings - incremental with magnetic sensing
- Split wheel design for easiest mounting on installed shafts
- Very large axial tolerances В±8 mm
- Max. 131072 pulses per revolution
- Status indication via system OK output and LED
- Robust and wearless
- Fully encapsulated electronics IP 67
| Status indicator | Color-LED, system OK output |
| Output stages | HTL TTL/RS422 |
| Scan ratio | 45...55 % |
| MIR 350A - HDmag flex output signals | A+, B+, R+, A-, B-, R- |
| Outer diameter adapter wheel | 350 mm |
| manufacter SKU | MIR 350A - HDmag flex |
| Over all depth adapter wheel | 40 mm |
| Interference immunity | EN 61000-6-2 |
| Voltage supply | 4.75...30 VDC |
| Pulses per revolution | 512...131072 |
| Output frequency | ≤500 kHz (HTL) ≤2 MHz (TTL) |
| Materials | Housing: aluminium alloy Adapter wheel: stainless steel |
| Sinewave cycles per turn | 512...16384 |
| Operating speed | 2000 rpm |
| Shaft diameter tolerance | -0.4...0 mm |
| Initializing time | ≤1000 ms after power on |
| Consumption w/o load | ≤300 mA (24 VDC) |
| Reference signal | Zero pulse, width 90° |
| Output frequency | ≤500 kHz |
| Resistance | IEC 60068-2-6 Vibration 30 g, 10-2000 Hz IEC 60068-2-27 Shock 300 g, 6 ms |
| Axial tolerance | ±8 mm (belt to head) |
| Phase shift | 90° ±2° |
| Radial tolerance | 1...3 mm (belt to head) |
| Connection | Flange connector M23, 12-pin |
| Operating temperature | -40...+85 °C |
| Phase shift | 90° ±2° |
| Approval | CE |
| Sensing method | Magnetic |
| Reference signal | Zero pulse, width 360° |
| Emitted interference | EN 61000-6-3 |
| Output stages | SinCos 1 Vpp |
| Shaft type | ø90...300 mm (through hollow shaft) |
| Weight approx. | 880 g (head) 13 kg (wheel with belt, bore size ø90 mm) 12.5 kg (wheel with belt, bore size ø150 mm) 7 kg (wheel with belt, bore size ø299 mm) |
| Dimensions (sensor head) | 165 x 25 x 93 mm |
| Protection DIN EN 60529 | IP 67 |
Comments
No comments yet