Baumer OXE7.E15T-L82C.SIMD.7AI Edge Tools

Item Number: OXE7.E15T-L82C.SIMD.7AI
  • measuring mode: edges, center, width, gap
  • 100 ... 150 mm
  • pulsed red laser diode
  • analog and RS 485
  • Touch Display, RS485
  • connector M12 8 pin
  • -20 ... 50 °C
  • IP 67
2459.24
Quantity
-
+
Total price: 2459.24
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Baumer Article no11177353
TypeMeasuring mode: edges, center, width, gap
VersionPosCon OXE7 - for very precise measurements and dark objects
Measuring range (width)48 ... 72 mm
Measuring range (distance)100 ... 150 mm
Measuring frequency111 ... 370 Hz
Resolution20 Вµm
Repeat accuracyВ± 10 Вµm
Smallest detectable object width0.7 mm
Smallest detectable gap1.5 mm
Smallest detectable step0.7 mm
Linearity errorВ± 50 ... 75 Вµm
Temperature drift< 0,03 % measured value/K
Power on indicationLED green
Output indicatorLED yellow / LED red
Light sourcePulsed red laser diode
Wave length656 nm
Laser class1
Optical peak power max.15 mW
AdjustmentTouch Display, RS485
Response time / release time8.1 ... 18 ms
Voltage supply range +Vs15 ... 28 VDC
Current consumption max. (no load)150 mA
Output circuitAnalog and RS 485
Output signal4В ...В 20В mA / 0В ...В 10В VDC
Switching outputPush-pull
Output functionOut 1 / Alarm
Output current< 100 mA
Baud rate115200, adjustable
Reverse polarity protectionYes, Vs to GND
Short circuit protectionYes
Width / diameter26 mm
Height / length74 mm
Depth55 mm
TypeRectangular, front view
Housing materialAluminum
Front (optics)Glass
Connection typesConnector M12 8 pin
Weight130 g
Ambient light immunity< 35 kLux
Operating temperature-20В ...В +50 В°C
Protection classIP 67
Storage temperature-25В ...В +75 В°C
Vibration (sinusoidal)IEC 60068-2-6:20081.5 mm p-p at f = 10 - 57 Hz, 10 cycles per axis10 g at f = 58 - 2000 Hz, 10 cycles per axis
Shock (semi-sinusoidal)IEC 60068-2-27:200950 g / 11 ms resp. 100 g / 6 ms, 10 jolts per axis and direction100 g / 2 ms, 5000 jolts per axis and direction

Comments

No comments yet

Write a comment