Baumer PMG10 - Incremental
Solid shaft HeavyDuty encoder
- Incremental encoder (optionally programmable)
- HTL/TTL output driver for cable length up to 350 m
- Very high resistance to shock and vibrations
- Two-sided insulated bearing system with hybrid bearings
- Special protection against corrosion CX (C5-M)
- Large terminal box, turn by 180В°
- Function display via LEDs
Item Number:
PMG10 - Incremental
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Solid shaft diam. 11 mm with EURO flange B10
Baumer Article no | 11191144 |
Voltage supply | 4.75...30 VDC |
Short-circuit proof | Yes |
Consumption w/o load | ?100 mA |
Initializing time | ? 500 ms after power on |
Pulses per revolution | 1 ... 131072 |
Phase shift | 90 В° В±20В° |
Duty cycle | 40...60 % |
Reference signal | Zero pulse, width 90В° |
Sensing method | Magnetic |
Output signals | A+, B+, R+, A-, B-, R-Error output nE+, nE- |
Output stages | TTL/HTL (Vin = Vout) |
Programming interface | RS485 (?600 m) |
Programmable parameters | Pulse numberSwitch-off and switch-on speedsSwitching delay time |
Diagnostic function | Function control |
Status indicator | 4 LEDs in device back side |
Interference immunity | EN 61000-6-2 |
Emitted interference | EN 61000-6-3 |
Approval | CEUL approval / E217823EAC |
Switching accuracy | В± 2 % (or 1 Digit) |
Switching outputs | 1 output (Open collector) |
Output switching capacity | 30 VDC; ?100 mA |
Switching hysteresis | 10 ... 100 % adjustable |
Switching delay time | ?20 ms |
Size (flange) | Гё115 mm |
Shaft type | Гё11В mm solid shaft |
Admitted shaft load | ?450 N axial?650 N radial |
Flange | EURO flange B10Housing foot B3 |
ProtectionВ ENВ 60529 | IP 66/IP 67 |
Operating speed | ?12000 rpm |
Range of switching speed | ns (off) = В±2...12000 rpm, factory setting 6000 rpm |
Operating torque typ. | 10 Ncm |
Rotor moment of inertia | 1 kgcmВІ |
Material | Housing: aluminium alloyShaft: stainless steel |
Operating temperature | -40...+95В В°C |
Relative humidity | 95 % non-condensing |
Resistance | IEC 60068-2-6Vibration 30В g, 10-2000 HzIEC 60068-2-27Shock 400 g, 1 ms |
Corrosion protection | IEC 60068-2-52 Salt mistfor ambient conditions CX (C5-M) according to ISO 12944-2 |
Connection | Terminal boxFlange connector M23 |
Weight approx. | 1.9 kg (depending on version) |
People also buy
Comments
No comments yet