Baumer TDPZ 0,2 + FSL

Combination tachogenerator

The Baumer TDPZ 0.2 + FSL is a combination tachogenerator with an integrated centrifugal switch, designed for industrial applications where high accuracy and reliability are required.

Datasheet

Electrical characteristics (tachogenerator):

• Immunity to interference: EN 61000-6-2
• Radiated interference: EN 61000-6-3
• Switching accuracy: ± 4% (Δn = 2 rev/min/s); 20% (Δn = 1500 rpm/s)
• Switching deviation: ≤3% (cw-ccw rotation)
• Switching hysteresis: 40% of the switching speed
• Switching outputs: 1 output, speed control
• Output switching capacity: ≤6 A / 230 VAC; ≤1 A / 125 VDC (EAC: <50 VAC / 75 VDC)
• Minimum switching current: 50 mA

Electrical characteristics:

• Direction change accuracy: ≤0.1%
• Linear tolerance: ≤0.15 %
• Temperature coefficient: ± 0.05 %/K (in idle mode)
• Insulation class: B
• Calibration tolerance: ±1%
• Climatic test: Damp heat, constant (IEC 60068-2-3, Ca)
• Power: TDP: 12 W (speed ≥3000 rpm); TDPZ: 2x 3 W (speed ≥3000 rpm)
• Armature circuit time constant: <75 µs (TDP); <40 µs (TDPZ)
• Open output voltage: TDP: 10...150 mV per rpm; TDPZ: 20...100 mV per rpm

Mechanical design:

• Size (flange): ø115 mm
• Shaft type: ø11 mm solid shaft
• Permissible load on the shaft: ≤60 N axial, ≤80 N radial
• Flange: EURO flange B10, Housing foot B3
• Protection EN 60529: IP 55
• Speed: ≤1.25 ns
• Switching speed range: 850...4500 rpm (Δn = 2 rpm/s)
• Traction torque: 1.5 Ncm
• Moment of inertia of the rotor: 1.4 kgcm² (TDP), 1.5 kgcm² (TDPZ)
• Material: Body: cast aluminum; Shaft: stainless steel
• Operating temperature: -30...+130 °C
• Vibration resistance: IEC 60068-2-6, Vibration 5 g, 10-2000 Hz
• Impact resistance: IEC 60068-2-27, Impact 150 g, 1 ms
• Connection: 2x terminal box
• Weight: approx. 3.1 kg (TDP), 3.5 kg (TDPZ)
• Approval: CE

Advantages:

• High Accuracy: Provides accurate speed and position measurement in steps per revolution from 20 to 2000.
• Integrated centrifugal switch: Effective speed control with high precision.
• Resistance to vibrations and shocks: Reliability in difficult industrial environments thanks to high resistance to vibrations and shocks.
• Optical measurement method: High reliability and measurement accuracy.