Baumer TIL

Incremental encoder

The Baumer TIL is a high-precision incremental encoder designed for industrial applications where high accuracy and reliability are required. Due to its hollow shaft design, this encoder is ideal for use in installations with rotating parts.

Datasheet

Electrical characteristics:

• Supply voltage: 5 VDC ±5 %, 8...26 VDC
• Reverse polarity protection: Yes
• No-load consumption: ≤85 mA
• Steps per revolution: 100 ... 2048
• Reference signal: Zero pulse, width 90°
• Measurement method: Optical
• Output frequency: ≤120 kHz
• Output signals: A, B, N + inverse
• Output stages: Linedriver/RS422, Push-pull, short-circuit protected
• Immunity to interference: EN 61000-6-2
• Radiated interference: EN 61000-6-3

Mechanical design:

• Size (flange): 60 x 72 mm
• Shaft type: ø10 mm, ø12 mm, ø14 mm, ø16 mm (through hollow shaft)
• Mounting kit: 019
• Protection EN 60529: IP 54
• Working speed: ≤6000 rpm
• Starting torque: ≤0.01 Nm (+20 °C)
• Material: Body: aluminum, shaft: stainless steel
• Operating temperature: -20...+70 °C
• Relative humidity: 90% non-condensing
• Vibration resistance: EN 60068-2-6, Vibration 10 g, 55-2000 Hz
• Impact resistance: EN 60068-2-27, Impact 100 g, 11 ms
• Connection: Cable 1 m
• Weight: about 300 g

Advantages:

• High accuracy: Provides accurate position measurement in steps per revolution from 100 to 2048.
• Hollow shaft: Ideal for installations with rotating parts.
• Vibration and shock resistance: High reliability in difficult industrial environments thanks to vibration and shock resistance.
• High signal quality: Thanks to the optical measurement method.
• Protection against interference: Meets EN 61000-6-2 and EN 61000-6-3 standards.