Baumer VCXG-25M.I
Industrial Camera

Baumer VCXG-25M.I
  • 1920 x 1200 px
  • onsemiВ PYTHON2000
  • 2/3" CMOS
  • 53 fps
  • Gigabit Ethernet
Item Number: VCXG-25M.I
Total price: 1604.32
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Gigabit Ethernet, 2,3 Megapixel, Monochrome
Baumer Article no11186799
Sensoronsemi PYTHON2000
Sensor type2/3″ CMOS
Shutter typeGlobal shutter
Resolution1920 x 1200 px
Pixel size4.8 x 4.8 Вµm
Exposure time0.02 ... 1000 ms
Dark noise11.17 e-
Saturation capacity9271 e-
Dynamic range57.7 dB
Signal-to-noise ratio39.7 dB
Quantum efficiency57.8 % @ 536 nm
Image formats, interface frame rate max.Full Frame, 1920 x 1200 px, max. 53 fpsBinning 2x2, 960 x 600 px, max. 59 fpsBinning 2x1, 960 x 1200 px, max. 59 fpsBinning 1x2, 1920 x 600 px, max. 59 fps
Image formats, aquisition frame rate max. (Burst Mode)Full Frame, 1920 x 1200 px, max. 59 fps
Pixel formatsMono8Mono10
Analog controlsGain (0 ... 18 dB)Offset (0 ... 63 LSB 10 Bit)
Color modelsMono
Basic FunctionsExposureGain Trigger / Exposure Active (Flash)Binning 2x2Partial ScanOffsetFree Running Mode (Live Image)
Auto FunctionsExposure AutoGain Auto
Image Pre-processingImage Flipping (X/Y)LUT / Gamma
Acquisition / InterfaceBurst Mode Adjustable FramerateShort Exposure Time EnableDevice Link Throughput LimitInternal Image Buffer
Synchronizationfree running trigger
Trigger sourcesHardwareSoftwareActionCommand
Trigger delay0 ... 2 sec, tracking and buffering of up to 256 trigger signals
Process SynchronizationEventsTimerTrigger DelayDebouncerCounterSequencerTrigger via Action CMD (GigE)Additional Output Modes (e.g. Trigger Ready)PWM (PWM Duration / PWM Duty Cycle)4 power outputs with up to 120 W (max. 48 V / 2.5 A)Selectable Output format (e.g. Tri State, Push Pull)Chunk data inside transferred imageEncoder support via Counter End trigger source
Additional FunctionsUser SetIntegrated temperature sensorReadable additional information (e.g. sensor information)Save Custom Data
Internal image buffer53 MB8 images (Trigger Mode)1 image (Free Running Mode)
Data interfaceGigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer rate 100 Mbits/sec, Connector: M12 / 8 pol x-coded, screwable type
Process interfaceM12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180)
Power supplyvia M12/12 pins a-coded or Power over Ethernet (PoE)
Lens mountC-mount
Width40 mm
Height40 mm
Depth50.8 mm
Weight? 137 g
Materialaluminum, hard-anodized
Voltage supply range +Vs12 ... 24 V DC (external power supply)36 ... 57 V DC (Power over Ethernet)
Power consumptionapprox. 2,8 W @ 12 VDC and 53 fpsapprox. 3,5 W @ 48 VDC (PoE) and 53 fps
Flash memory size128 kB
Operating temperature0 ... +65 В° @ T = measurement point
Humidity10 ... 90 % (non-condensing)
Protection classIP 40IP 54 (with mounted tube and cable)IP 65 (with mounted tube and cable)IP 67 (with mounted tube and cable)IP 69K (with stainless steel housing accessory)
Lines4 input lines4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A)
ConformityCERoHSEACBIS-CRS (R-41207004)


No comments yet

Write a comment