Baumer VCXG-32C.I.XT Industrial Camera


Item Number: VCXG-32C.I.XT
- 2048 x 1536 px
- Sony IMX265
- 1/1.8" CMOS
- 39 fps
- Gigabit Ethernet
- Overview
- Datasheet
- Alternative numbers
- Comments
Gigabit Ethernet, 3,1 Megapixel, Color
Baumer Article no | 11188951 |
Sensor | Sony IMX265 Gen2 |
Mono/Color | Color |
Sensor type | 1/1.8″ CMOS |
Shutter type | Global shutter |
Resolution | 2048 x 1536 px |
Pixel size | 3.45 x 3.45 Вµm |
Exposure time | 0.001 ... 60000 ms |
Dark noise | 1.97 e- |
Saturation capacity | 8252 e- |
Dynamic range | 70.9 dB |
Signal-to-noise ratio | 39.7 dB |
Quantum efficiency | 45.9 % @ 465 nm57.2 % @ 536 nm52.8 % @ 631 nm |
Image formats, interface frame rate max. | Full Frame, 2048 x 1536 px, max. 39 fpsBinning 2x2, 1024 x 768 px, max. 56 fpsBinning 2x1, 1024 x 1536 px, max. 56 fpsBinning 1x2, 2048 x 768 px, max. 56 fps |
Image formats, aquisition frame rate max. (Burst Mode) | Full Frame, 2048 x 1536 px, max. 56 fps |
Pixel formats | BayerRG8BayerRG10BayerRG12BayerRG12 PackedMono8Mono10Mono12Mono12 PackedRGB8BGR8 |
Analog controls | Gain (0 ... 48 dB)Offset (0 ... 255 LSB 12 Bit) |
Color models | MonoRGBBGR |
Basic Functions | ExposureGain / Color Gain Trigger / Exposure Active (Flash)Binning 2x2Partial ScanOffsetFree Running Mode (Live Image) |
Auto Functions | Exposure AutoGain AutoWhite Balance AutoColor Transformation Auto |
Image Pre-processing | Image Flipping (X/Y)Color Processing (RGB, BGR, Mono)Color Enhancement (with optimized ColorTransformationMatrix)LUT / Gamma |
Acquisition / Interface | Burst Mode Adjustable FramerateShort Exposure Time EnableDevice Link Throughput LimitInternal Image Buffer |
Synchronization | free running trigger |
Trigger sources | HardwareSoftwareActionCommand |
Trigger delay | 0 ... 2 sec, tracking and buffering of up to 256 trigger signals |
Process Synchronization | EventsTimerTrigger DelayDebouncerCounterSequencerTrigger via Action CMD (GigE)Additional Output Modes (e.g. Trigger Ready)PWM (PWM Duration / PWM Duty Cycle)4 power outputs with up to 120 W (max. 48 V / 2.5 A)Selectable Output format (e.g. Tri State, Push Pull)Chunk data inside transferred imageEncoder support via Counter End trigger source |
Additional Functions | User SetIntegrated temperature sensorReadable additional information (e.g. sensor information)Save Custom Data |
Internal image buffer | 72 MB8 images (Trigger Mode)1 image (Free Running Mode) |
Data interface | Gigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer rate 100 Mbits/sec, Connector: M12 / 8 pol x-coded, screwable type |
Process interface | M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180) |
Power supply | via M12/12 pins a-coded or Power over Ethernet (PoE) |
Lens mount | C-mount |
Width | 40 mm |
Height | 40 mm |
Depth | 50.8 mm |
Weight | ? 137 g |
Material | aluminum, hard-anodized |
Voltage supply range +Vs | 12 ... 24 V DC (external power supply)36 ... 57 V DC (Power over Ethernet) |
Power consumption | approx. 2,4 W @ 12 VDC and 39 fpsapprox. 3,1 W @ 48 VDC (PoE) and 39 fps |
Flash memory size | 128 kB |
Operating temperature | -40 ... +70 В°C @ T = measurement point |
Humidity | 10 ... 90 % (non-condensing) |
Protection class | IP 40IP 54 (with mounted tube and cable)IP 65 (with mounted tube and cable)IP 67 (with mounted tube and cable)IP 69K (with stainless steel housing accessory) |
Lines | 4 input lines4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A) |
Conformity | CERoHSKC (R-R-BkR-VCXG-51MI)EAC |
People also buy
Comments
No comments yet