Baumer VCXG-51C.I.XT
Industrial Camera

Baumer VCXG-51C.I.XT
  • 2448 x 2048 px
  • Sony IMX264
  • 2/3" CMOS
  • 24 fps
  • Gigabit Ethernet
Item Number: VCXG-51C.I.XT
2776.12
-
+
Total price: 2776.12
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Gigabit Ethernet, 5,0 Megapixel, Color
Baumer Article no11188952
SensorSony IMX264 Gen2
Mono/ColorColor
Sensor type2/3″ CMOS
Shutter typeGlobal shutter
Resolution2448 x 2048 px
Pixel size3.45 x 3.45 Вµm
Exposure time0.001 ... 60000 ms
Dark noise2 e-
Saturation capacity9190 e-
Dynamic range70.7 dB
Signal-to-noise ratio39.6 dB
Quantum efficiency45.7 % @ 465 nm57.3 % @ 536 nm52.3 % @ 631 nm
Image formats, interface frame rate max.Full Frame, 2448 x 2048 px, max. 24 fpsBinning 2x2, 1224 x 1024 px, max. 36 fpsBinning 2x1, 1224 x 2048 px, max. 36 fpsBinning 1x2, 2448 x 1024 px, max. 36 fps
Image formats, aquisition frame rate max. (Burst Mode)Full Frame, 2448 x 2048 px, max. 35 fpsFull Frame, 2448 x 2048 px, max. 35 fps
Pixel formatsBayerRG8BayerRG10BayerRG12BayerRG12 PackedMono8Mono10Mono12Mono12 PackedRGB8BGR8
Analog controlsGain (0 ... 48 dB)Offset (0 ... 255 LSB 12 Bit)
Color modelsMonoRGBBGR
Basic FunctionsExposureGain / Color Gain Trigger / Exposure Active (Flash)Binning 2x2Partial ScanOffsetFree Running Mode (Live Image)
Auto FunctionsExposure AutoGain AutoWhite Balance AutoColor Transformation Auto
Image Pre-processingImage Flipping (X/Y)Color Processing (RGB, BGR, Mono)Color Enhancement (with optimized ColorTransformationMatrix)LUT / Gamma
Acquisition / InterfaceBurst Mode Adjustable FramerateShort Exposure Time EnableDevice Link Throughput LimitInternal Image Buffer
Synchronizationfree running trigger
Trigger sourcesHardwareSoftwareActionCommand
Trigger delay0 ... 2 sec, tracking and buffering of up to 256 trigger signals
Process SynchronizationEventsTimerTrigger DelayDebouncerCounterSequencerTrigger via Action CMD (GigE)Additional Output Modes (e.g. Trigger Ready)PWM (PWM Duration / PWM Duty Cycle)4 power outputs with up to 120 W (max. 48 V / 2.5 A)Selectable Output format (e.g. Tri State, Push Pull)Chunk data inside transferred imageEncoder support via Counter End trigger source
Additional FunctionsUser SetIntegrated temperature sensorReadable additional information (e.g. sensor information)Save Custom Data
Internal image buffer115 MB8 images (Trigger Mode)1 image (Free Running Mode)
Data interfaceGigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer rate 100 Mbits/sec, Connector: M12 / 8 pol x-coded, screwable type
Process interfaceM12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180)
Power supplyvia M12/12 pins a-coded or Power over Ethernet (PoE)
Lens mountC-mount
Width40 mm
Height40 mm
Depth50.8 mm
Weight? 137 g
Materialaluminum, hard-anodized
Voltage supply range +Vs12 ... 24 V DC (external power supply)36 ... 57 V DC (Power over Ethernet)
Power consumptionapprox. 2,5 W @ 12 VDC and 24 fpsapprox. 3,0 W @ 48 VDC (PoE) and 24 fps
Flash memory size128 kB
Operating temperature-40 ... +70 В°C @ T = measurement point
Humidity10 ... 90 % (non-condensing)
Protection classIP 40IP 54 (with mounted tube and cable)IP 65 (with mounted tube and cable)IP 67 (with mounted tube and cable)IP 69K (with stainless steel housing accessory)
Lines4 input lines4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A)
ConformityCERoHSKC (R-R-BkR-VCXG-51MI)EAC

Comments

No comments yet

Write a comment