Baumer VCXG-53C.I.XT
Industrial Camera

Baumer VCXG-53C.I.XT
  • 2592 x 2048 px
  • onsemi PYTHON5000
  • 1" CMOS
  • 23 fps
  • Gigabit Ethernet
Item Number: VCXG-53C.I.XT
2480.01
-
+
Total price: 2480.01
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Gigabit Ethernet, 5,3 Megapixel, Color
Baumer Article no11188960
Sensoronsemi PYTHON5000
Mono/ColorColor
Sensor type1″ CMOS
Shutter typeGlobal shutter
Resolution2592 x 2048 px
Pixel size4.8 x 4.8 Вµm
Exposure time0.02 ... 1000 ms
Dark noise11.2 e-
Saturation capacity9095 e-
Dynamic range57.6 dB
Signal-to-noise ratio39.6 dB
Quantum efficiency43.5 % @ 465 nm47.8 % @ 536 nm50.6 % @ 631 nm
Image formats, interface frame rate max.Full Frame, 2592 x 2048 px, max. 23 fpsBinning 2x2, 1296 x 1024 px, max. 28 fpsBinning 2x1, 1296 x 2048 px, max. 28 fpsBinning 1x2, 2592 x 1024 px, max. 28 fps
Image formats, aquisition frame rate max. (Burst Mode)Full Frame, 2592 x 2048 px, max. 28 fps
Pixel formatsBayerRG8 BayerRG10 Mono8 Mono10 RGB8 BGR8able
Analog controlsGain (0 ... 18 dB)Offset (0 ... 63 LSB 10 Bit)
Color modelsMonoRGBBGR
Basic FunctionsExposureGain / Color Gain Trigger / Exposure Active (Flash)Binning 2x2Partial ScanOffsetFree Running Mode (Live Image)
Auto FunctionsExposure AutoGain AutoWhite Balance AutoColor Transformation Auto
Image Pre-processingImage Flipping (X/Y)Color Processing (RGB, BGR, Mono)Color Enhancement (with optimized ColorTransformationMatrix)LUT / Gamma
Acquisition / InterfaceBurst Mode Adjustable FramerateShort Exposure Time EnableDevice Link Throughput LimitInternal Image Buffer
Synchronizationfree running trigger
Trigger sourcesHardwareSoftwareActionCommand
Trigger delay0 ... 2 sec, tracking and buffering of up to 256 trigger signals
Process SynchronizationEventsTimerTrigger DelayDebouncerCounterSequencerTrigger via Action CMD (GigE)Additional Output Modes (e.g. Trigger Ready)PWM (PWM Duration / PWM Duty Cycle)4 power outputs with up to 120 W (max. 48 V / 2.5 A)Selectable Output format (e.g. Tri State, Push Pull)Chunk data inside transferred imageEncoder support via Counter End trigger source
Additional FunctionsUser SetIntegrated temperature sensorReadable additional information (e.g. sensor information)Save Custom Data
Internal image buffer122 MB8 images (Trigger Mode)1 image (Free Running Mode)
Data interfaceGigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer rate 100 Mbits/sec, Connector: M12 / 8 pol x-coded, screwable type
Process interfaceM12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180)
Power supplyvia M12/12 pins a-coded or Power over Ethernet (PoE)
Lens mountC-mount
Width40 mm
Height40 mm
Depth50.8 mm
Weight? 137 g
Materialaluminum, hard-anodized
Voltage supply range +Vs12 ... 24 V DC (external power supply)36 ... 57 V DC (Power over Ethernet)
Power consumptionapprox. 2,9 W @ 12 VDC and 23 fpsapprox. 3,6 W @ 48 VDC (PoE) and 23 fps
Flash memory size128 kB
Operating temperature-40 ... +70 В°C @ T = measurement point
Humidity10 ... 90 % (non-condensing)
Protection classIP 40IP 54 (with mounted tube and cable)IP 65 (with mounted tube and cable)IP 67 (with mounted tube and cable)IP 69K (with stainless steel housing accessory)
Lines4 input lines4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A)
ConformityCERoHSEAC

Comments

No comments yet

Write a comment