Baumer X 700 - CANopen®

Absolute encoders

Baumer X 700 - CANopen® is a high-precision multipoint absolute encoder designed for industrial applications where high accuracy and reliability are required. This encoder uses the CANopen® interface, which ensures fast and reliable data transmission.

Datasheet

Electrical characteristics:

• Supply voltage: 10...30 VDC
• Reverse polarity protection: Yes
• No-load consumption: ≤50 mA (24 VDC)
• Initialization time: typically 250ms after power-on
• Interface: CANopen®
• Function: Multi-point rotation (Multiturn)
• Transmission speed: 10 ... 1000 kBaud
• Operation mode: Event-triggered / timed, Remotely requested, Synchronous (cyclic), Synchronous (acyclic)
• Identifier: 11 bits
• Steps per revolution: ≤262144 / 18 bits
• Number of revolutions: ≤16384 / 14 bits
• Absolute accuracy: ±0.025°
• Measurement method: Optical
• Output stages: CAN bus standard ISO / DIS 11898
• Immunity to interference: EN 61000-6-2
• Radiated interference: EN 61000-6-4

Programmable parameters:

• Modes of operation
• General resolution
• Scaling
• Rotation speed monitoring
• Diagnostic function
• Position or parameter error
• Multipoint definition

Mechanical design:

• Size (flange): ø70 mm
• Shaft type: ø10 mm solid shaft (clamping flange)
• Flange: Clamping flange
• Protection EN 60529: IP 67
• Operating speed: ≤6000 rpm (mechanical), ≤6000 rpm (electric)
• Initial acceleration: ≤1000 U/s²
• Starting torque: ≤0.4 Nm (+25 °C)
• Permissible load on the shaft: ≤60 N axial, ≤50 N radial
• Material: Body: stainless steel, Flange: stainless steel
• Operating temperature: -20...+70 °C
• Relative humidity: 95% non-condensing
• Vibration resistance: EN 60068-2-6, Vibration 10 g, 16-2000 Hz
• Impact resistance: EN 60068-2-27, Impact 200 g, 6 ms
• Explosion protection: Ex II 2G Ex d IIC T6, Ex II 2D
• Connection: 2 m cable (other lengths on request)
• Weight: approximately 1300 g

Advantages:

• High accuracy: Provides accurate position measurement in steps per revolution up to 262144 (18 bits).
• CANopen® interface: Provides fast and reliable data transfer.
• Multiple rotation: Supports up to 16384 rotations (14 bits).
• Vibration and shock resistance: High reliability in difficult industrial environments thanks to vibration and shock resistance.
• High signal quality: Thanks to the optical measurement method.
• Protection against interference: Meets EN 61000-6-2 and EN 61000-6-4 standards.
• Programmable parameters: Flexibility in settings of operating modes, scaling and monitoring.