Endress+Hauser FieldPort SWA50
Adapter for all HART field devices
WirelessHART and/or BluetoothВ® communication interface,
Operating frequency: 2.4 GHz (ISM band),
Transmission range under reference conditions:
WirelessHART communication - up to 200 m (656 ft),
Bluetooth communication - up to 40 m (131 ft)
- Overview
- Comments
Intelligent BluetoothВ® and/or WirelessHART adapter for all HART field devices.
Measuring principleWirelessHART
FunctionIntelligent WirelessHART and/or BluetoothВ® interface module for easy and fast connection to HART devices
CertificationNon-hazardous area, ATEX, IEC Ex
InputOne point-to-point with HART device
OutputWirelessHART and/or BluetoothВ® communication interface,
Operating frequency: 2.4 GHz (ISM band),
Transmission range under reference conditions:
WirelessHART communication - up to 200 m (656 ft),
Bluetooth communication - up to 40 m (131 ft)
Loop-powered 4 to 20 mA
Dimensions (wxhxd)W x H x D: 146 mm x 42 mm x 42 mm
(dimensions in mm 25.4 = 1 inch)
Internal software for reading data from HART field devices and communicating over WirelessHART and/or BluetoothВ®
OperationIntegral via DIP-switches,
Cell Phone configuration via SmartBlue App and BluetoothВ®,
Field Xpert configuration via BluetoothВ® or HART-modem,
PC configuration via FieldCare and HART-modem,
PC configuration via FieldCare and WirelessHART Gateway
24 V DC (min. 4 V DC, max. 30 V DC): min. 3.6 mA loop current required for start-up
Voltage drop if internal HART communication resistor is deactivated:
3.2 V in operation, < 3.8 V at start-up
Voltage drop if internal HART communication resistor is activated (270 Ohm):
< 4.2 V at 3.6 mA loop current, < 9.3 V at 22.5 mA loop current
Comments
No comments yet