Endress+Hauser Liquicap FMI52
Capacitance Level measurement
Capacitive level transmitter
Accuracyrepeatablity 0,1%
Process temperature-80В°C...200В°C
-112В°F...392В°F
Vacuum ... 100 bar
(Vaccum ... 1450 psi)
0.42 m ... 10.0 m
(1.38 ft ... 33 ft)
Insulation material: FEP,PFA
316L
- Overview
- Comments
Radar level transmitter for continuous level measurement and interfacial measurements liquids Liquicap M. Economical two-wire connection. Suitable for explosive industries. For liquids with electrical conductivity from 100 µS/cm calibration is not required.
For continuous level and interface measurement in liquids - for large measuring ranges.
Measuring principleCapacitive
Characteristic / ApplicationFully insulated rope probe, for standard and extreme process conditions (temperature, pressure)
Interface measurementInterfaces liquid / liquid also with emulsion layers
SpecialitiesInactive length
Factory calibrated
short response time by change of value
12-36V DC HART
PFM
repeatablity 0,1%
Linearity error for conductive liquids<0,25%
Ambient temperature-50В°C...+70В°C
-58В°F...+158В°F
-80В°C...200В°C
-112В°F...392В°F
Vacuum ... 100 bar
(Vaccum ... 1450 psi)
Insulation material: FEP,PFA
316L
G 3/4, G 1, G1 1/2 /NPT 3/4", NPT 1, NPT1 1/2"
Flange from DN25.../ASME 1".../JIS...
Tri-Clamp ISO02852 gap free plated
Dairy coupling
Flush-mounted seal
Total length: 6m (20ft)
Inactive length: max. 2m (7ft)
0.42 m ... 10.0 m
(1.38 ft ... 33 ft)
4...20mA HART
PFM
ATEX, FM, CSA, IEC Ex, TIIS, INMETRO, NEPSI, EAC
Safety approvalsSIL
Design approvalsEN 10204-3.1
NACE MR0175
EHEDG
Marine approvalGL/ ABS/ DNV
OptionsSeparate housing
gas-tight probe seal
Changing, non-conductive
media, conductivity
< 100 ОјS/cm
Notice the pressure and temperature derating
Comments
No comments yet