Endress+Hauser Proline Promass E 300
Coriolis flowmeter

Mass flow (liquid): В±0.15 % (standard), В±0.10 % (option)
Volume flow (liquid): В±0.15 %
Mass flow (gas): В±0.50 %
Density (liquid): В±0.0005 g/cmВі
0 to 180 000 kg/h (0 to 6615 lb/min)
Medium temperature range40 to +150 В°C (40 to +302 В°F)
Max. process pressurePN 100, Class 600, 63K
Wetted materialsMeasuring tube: 1.4539 (904L)
Connection: 1.4404 (316/316L)
- Overview
- Datasheet
- Alternative numbers
- Comments
Mid-range Coriolis flowmeter with a compact, easily accessible transmitter.
Measuring principleCoriolis
Product headlineFlowmeter with minimized total cost of ownership and a compact, easily accessible transmitter.
Accurate measurement of liquids and gases for a wide range of standard applications.
LR approval, DNV GL approval, ABS approval, BV approval
Measuring principleCoriolis
Product headlineFlowmeter with minimized total cost of ownership and a compact, easily accessible transmitter.
Accurate measurement of liquids and gases for a wide range of standard applications.
Cost...effective multi...purpose device; an alternative to conventional volumetric flowmeters. Fewer process measuring points multivariable measurement (flow, density, temperature). Space...saving installation no in-/outlet run needs.
Compact dual-tube sensor. Medium temperature up to +150 В°C (+302 В°F).
Full access to process and diagnostic information numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety freely configurable I/O functionality. Integrated verification Heartbeat Technology.
Process pressure up to 100 bar (1450 psi). Compact dual-compartment housing with up to 3 I/Os. Backlit display with touch control and WLAN access.
DN 8 to 80 (в…њ to 3")
Wetted materialsMeasuring tube: 1.4539 (904L)
Connection: 1.4404 (316/316L)
Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration
Max. measurement errorMass flow (liquid): В±0.15 % (standard), В±0.10 % (option)
Volume flow (liquid): В±0.15 %
Mass flow (gas): В±0.50 %
Density (liquid): В±0.0005 g/cmВі
0 to 180 000 kg/h (0 to 6615 lb/min)
Max. process pressurePN 100, Class 600, 63K
Medium temperature range40 to +150 В°C (40 to +302 В°F)
Ambient temperature rangeStandard: 40 to +60 В°C (40 to +140 В°F)
Option: 50 to +60 В°C (58 to +140 В°F)
1.4301 (304), corrosion resistant
Transmitter housing materialAlSi10Mg, coated; stainless steel for hygenic transmitter design
Degree of protectionStandard: IP66/67, Type 4X enclosure
IP69
4-line backlit display with touch control (operation from outside)
Configuration via local display and operating tools possible
Remote display available"
3 outputs:
4-20 mA HART (active/passive)
4-20 mA WirelessHART
4-20 mA (active/passive)
Pulse/frequency/switch output (active/passive)
Double pulse output (active/passive)
Relay output
Status input
4-20 mA input
HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, Profinet, Ethernet/IP, OPC-UA
Power supplyDC 24 V
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)
ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC, UK Ex
Product safetyCE, C-tick, EAC marking
Functional safetyFunctional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
Metrological approvals and certificatesCalibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 Section 7.1.5.2 a (TГњV SГњD attestation)
LR approval, DNV GL approval, ABS approval, BV approval, CCS approval
Pressure approvals and certificatesPED, CRN
Material certificates3.1 material
Hygienic approvals and certificates3-A, EHEDG, cGMP
Measuring principleCoriolis
Product headlineFlowmeter with minimized total cost of ownership and a compact, easily accessible transmitter.
Accurate measurement of liquids and gases for a wide range of standard applications.
Cost...effective multi...purpose device; an alternative to conventional volumetric flowmeters. Fewer process measuring points multivariable measurement (flow, density, temperature). Space...saving installation no in-/outlet run needs.
Compact dual-tube sensor. Medium temperature up to +150 В°C (+302 В°F).
Full access to process and diagnostic information numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety freely configurable I/O functionality. Integrated verification Heartbeat Technology.
Process pressure up to 100 bar (1450 psi). Compact dual-compartment housing with up to 3 I/Os. Backlit display with touch control and WLAN access.
DN 8 to 80 (в…њ to 3")
Wetted materialsMeasuring tube: 1.4539 (904L)
Connection: 1.4404 (316/316L)
Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration
Max. measurement errorMass flow (liquid): В±0.15 % (standard), В±0.10 % (option)
Volume flow (liquid): В±0.15 %
Mass flow (gas): В±0.50 %
Density (liquid): В±0.0005 g/cmВі
0 to 180 000 kg/h (0 to 6615 lb/min)
Max. process pressurePN 100, Class 600, 63K
Medium temperature range40 to +150 В°C (40 to +302 В°F)
Ambient temperature rangeStandard: 40 to +60 В°C (40 to +140 В°F)
Option: 50 to +60 В°C (58 to +140 В°F)
1.4301 (304), corrosion resistant
Transmitter housing materialAlSi10Mg, coated; stainless steel for hygenic transmitter design
Degree of protectionStandard: IP66/67, Type 4X enclosure
IP69
4-line backlit display with touch control (operation from outside)
Configuration via local display and operating tools possible
Remote display available"
3 outputs:
4-20 mA HART (active/passive)
4-20 mA WirelessHART
4-20 mA (active/passive)
Pulse/frequency/switch output (active/passive)
Double pulse output (active/passive)
Relay output
Status input
4-20 mA input
HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, Profinet, Ethernet/IP, OPC-UA
Power supplyDC 24 V
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)
ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC, UK Ex
Product safetyCE, C-tick, EAC marking
Functional safetyFunctional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
Metrological approvals and certificatesCalibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 Section 7.1.5.2 a (TГњV SГњD attestation)
LR approval, DNV GL approval, ABS approval, BV approval, CCS approval
Pressure approvals and certificatesPED, CRN
Material certificates3.1 material
Hygienic approvals and certificates3-A, EHEDG, cGMP
Measuring principleCoriolis
Product HeadlineFlowmeter with minimized total cost of ownership and a compact, easily accessible transmitter.
Accurate measurement of liquids and gases for a wide range of standard applications.
Cost...effective multi...purpose device; an alternative to conventional volumetric flowmeters. Fewer process measuring points multivariable measurement (flow, density, temperature). Space...saving installation no in-/outlet run needs.
Compact dual-tube sensor. Medium temperature up to +150 В°C (+302 В°F).
Full access to process and diagnostic information numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety freely configurable I/O functionality. Integrated verification Heartbeat Technology.
Process pressure up to 100 bar (1450 psi). Compact dual-compartment housing with up to 3 I/Os. Backlit display with touch control and WLAN access.
Coriolis
Product headlineFlowmeter with minimized total cost of ownership and a compact, easily accessible transmitter.
Accurate measurement of liquids and gases for a wide range of standard applications.
Cost...effective multi...purpose device; an alternative to conventional volumetric flowmeters. Fewer process measuring points multivariable measurement (flow, density, temperature). Space...saving installation no in-/outlet run needs.
Compact dual-tube sensor. Medium temperature up to +150 В°C (+302 В°F).
Full access to process and diagnostic information numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety freely configurable I/O functionality. Integrated verification Heartbeat Technology.
Process pressure up to 100 bar (1450 psi). Compact dual-compartment housing with up to 3 I/Os. Backlit display with touch control and WLAN access.
DN 8 to 80 (в…њ to 3")
Wetted materialsMeasuring tube: 1.4539 (904L)
Connection: 1.4404 (316/316L)
Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration
Max. measurement errorMass flow (liquid): В±0.15 % (standard), В±0.10 % (option)
Volume flow (liquid): В±0.15 %
Mass flow (gas): В±0.50 %
Density (liquid): В±0.0005 g/cmВі
0 to 180 000 kg/h (0 to 6615 lb/min)
Max. process pressurePN 100, Class 600, 63K
Medium temperature range40 to +150 В°C (40 to +302 В°F)
Ambient temperature rangeStandard: 40 to +60 В°C (40 to +140 В°F)
Option: 50 to +60 В°C (58 to +140 В°F)
1.4301 (304), corrosion resistant
Transmitter housing materialAlSi10Mg, coated; stainless steel for hygenic transmitter design
Degree of protectionStandard: IP66/67, Type 4X enclosure
IP69
4-line backlit display with touch control (operation from outside)
Configuration via local display and operating tools possible
Remote display available"
3 outputs:
4-20 mA HART (active/passive)
4-20 mA WirelessHART
4-20 mA (active/passive)
Pulse/frequency/switch output (active/passive)
Double pulse output (active/passive)
Relay output
Status input
4-20 mA input
HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, Profinet, Ethernet/IP, OPC-UA
Power supplyDC 24 V
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)
ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC, UK Ex
Product safetyCE, C-tick, EAC marking
Functional safetyFunctional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
Metrological approvals and certificatesCalibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 Section 7.1.5.2 a (TГњV SГњD attestation)
LR approval, DNV GL approval, ABS approval, BV approval, CCS approval
Pressure approvals and certificatesPED, CRN
Material certificates3.1 material
Hygienic approvals and certificates3-A, EHEDG, cGMP
Comments
No comments yet