Endress+Hauser Proline Prosonic Flow P 500

Ultrasonic flowmeter

Clamp-on flowmeter for limited spaces in process industries with up to 3 I/Os.

Ultrasonic flow

Clamp-on flowmeter for limited spaces in process industries with up to 3 I/Os.
Constant accuracy even when mounted with short inlet run thanks to FlowDC.
Bidirectional measurement of various fluids, e.g. liquid hydrocarbons and chemicals.

High safety standards SIL by design,
international hazardous area approvals. Long-term stable signal maintenance-free
permanent mounting from outside with coupling pads. Reliable measurement on various pipe materials sensor for GRP and plastic pipes available.
Mounting without process interruption. Wide nominal diameter range: DN 15 to 4000 (ВЅ to 160"). Medium temperature: -40 to +170 В°C (-40 to +338 В°F).

Full access to process and diagnostic information numerous, freely combinable I/Os. Reduced complexity and variety
freely configurable I/O functionality. Integrated verification Heartbeat Technology.
Remote version with up to 3 I/Os. Backlit display with touch control and WLAN access. Standard cable between sensor and transmitter.

Dual channel, 1 or 2 paths : DN 15 to 4000 (1/2 to 160")

Clamp on system:
Sensor holder 1.4301/304, 1.4404/316L
Sensor housing 1.4301/304, 1.4404/316L
Strapping bands 1.4301/304, 1.4404/316L

Volume flow, sound velocity, flow velocity, totalizer

Volume flow:
В±3% o.r. for DN 15
В±2% o.r. for DN 25 to DN 200
В±2% o.r. above DN 200

0 to 15 m/s (0 to 50 ft/s)

N/A

DN 15 to 65 (ВЅto 2ВЅ"): -40 to +150В°C (-40 +302 В°F)
DN 50 to 4000 (2 to 160"): -40 to +170В°C (-40 to +338 В°F)

-40 to +60 В°C (-40 to +140 В°F)
50 to +60 В°C (-58 to +140 В°F) optional

N/A

AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L

Sensor remote version: IP68 type 6P
Transmitter remote version: IP66/67, Type 4X enclosure

4-line backlit display with touch control(operation from outside)
Optional: WLAN
Configuration via local display and operating tools possible

3 outputs:
4-20 mA HART (active/passive)
4-20 mA (active/passive)
Pulse/frequency/switch output (active/passive)
Double pulse output (active/passive)
Relay output

Status input
4-20 mA input

HART, Modbus RS485

DC 24 V
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)

ATEX, FM/CSA, UK Ex

Other approvals and certificates

CE, C-tick

Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511

Flowmeter verification for all frequencies except 0.3 MHz, reference line size: 5 MHz DN 50, all other frequencies DN 100
Verification performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 Section 7.1.5.2 a