Endress+Hauser Proline Prosonic Flow 92F
Ultrasonic flowmeter

Endress+Hauser Proline Prosonic Flow 92F

Ultrasonic flow meter

Max. measurement error

Volume flow (standard):
- В±0.5 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s)
Volume flow (option):
- В±0.3 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s)

Item Number: Proline Prosonic Flow 92F
Price on Request
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Comments

Prosonic ultrasonic inline flowmeter. Has flanged process connections and a 2-wire power-on-loop connection. For measuring conductive and non-conductive liquid products such as solvents, hydrocarbons, etc.

Highly accurate, loop-powered flowmeter with innovative parallel path design for minimum inlet runs.

Measuring range

0.5 to 10 m/s (1.6 to 33 ft/s)

Medium temperature range

-40 to +150 В°C (-40 to +302 В°F)
-40 to +200 В°C (-40 to +392 В°F) optional

Max. process pressure

PN 40 / ASME Cl. 300 / JIS 20K

Wetted materials

Sensor:
A351-CF3M (DN25 to 100)
1.4404/TP316/TP316L or A106 GrB (DN150 to 300)
Transducer: 1.4404/316/316L
Flanges : 1.4404/316/316L or A105/1.0432

Measuring principle

Ultrasonic flow

Product headline

Higly accurate, loop-powered flowmeter with innovative parallel path design for minimum inlet runs.
Inline device for homogeneous conductive and non-conductive liquids in the chemical and petrochemical industry.

Sensor features

Safe design for process industries international hazardous area approvals. No additional pressure loss full-bore design. Process transparency diagnostic capability.
Full compliance according to NACE MR0175 and MR010. Nominal diameter: DN 25 to 300 (1 to 12"). Medium temperature: 40 to 200 В°C (40 to 392 В°F).

Transmitter features

Easy installation and reduced installation costs loop-powered transmitter. Fully industry compliant IEC/ATEX/FM/CSA/JPN/NEPSI. Automatic recovery of data for servicing.
Device as compact or remote version. 2-line backlit display with push buttons. HART, PROFIBUS PA, FOUNDATION Fieldbus.

Nominal diameter range

2 path version: DN80 to 300 (3 to12")
3 path version: DN25 to 50 (1 to 2")
4 path version: DN 80 to 300 (3 to 12")

Wetted materials

Sensor:
A351-CF3M (DN25 to 100)
1.4404/TP316/TP316L or A106 GrB (DN150 to 300)
Transducer: 1.4404/316/316L
Flanges : 1.4404/316/316L or A105/1.0432

Measured variables

Volume flow, calculated mass flow, sound velocity, flow velocity, signal strength

Max. measurement error

Volume flow (standard):
- В±0.5 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s)
Volume flow (option):
- В±0.3 % o.r. for 0.5 to 10 m/s (1.6 to 33 ft/s)

Measuring range

0.5 to 10 m/s (1.6 to 33 ft/s)

Max. process pressure

PN 40 / ASME Cl. 300 / JIS 20K

Medium temperature range

-40 to +150 В°C (-40 to +302 В°F)
-40 to +200 В°C (-40 to +392 В°F) optional

Ambient temperature range

-40 to +60 В°C (-40 to +140 В°F) compact
-40 to +80 В°C (-40 to +176 В°F) remote sensor
-40 to +60 В°C (-40 to +140 В°F) remote transmitter

Transmitter housing material

AlSi10Mg, coated

Degree of protection

IP67, type 4X enclosure
IP68 type 6P enclosure (option for remote)

Display/Operation

2 lines backlit display with 3 push buttons

Outputs

1x 4-20 mA HART
1x Pulse/frequency/switch output (passive)

Inputs

N/A

Digital communication

HART, Profibus PA, FOUNDATION Fieldbus

Power supply

2 wire loop powered

Hazardous area approvals

ATEX,FM, CSA, JPN

Other approvals and certificates

3.1 material (wetted parts), calibration performed on accredited
calibration facilities (acc. to ISO/IEC 17025), CRN, AD2000
PED, EAC marking

Product safety

EAC marking

Metrological approvals and certificates

calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)

Pressure approvals and certificates

CRN, PED, AD2000

Material certificates

3.1 material (wetted parts)

Comments

No comments yet

Write a comment