Endress+Hauser Soliphant FTM51

Vibronic Point level detection

Level transmitters Soliphant M FTM51 from Endress Hauser are among the reliable point level switches with extension tube. Most often used for free-flowing fine-grained materials, there is a possibility of use in explosive areas.

FTM 51 is also ideal for silos that contain powdered or fine-grained solids even at their low bulk density: chalk, powdered dyes, cereals, cocoa, feed, flour, sugar. But the range of application of this device is not limited to this either.

The sensor functions normally in areas contaminated with gas and dust. Available in stainless steel body and polished fork or with aluminum body and special coating on the fork.

Maintenance free.

Main advantages of Soliphant M:

• SIL2 in accordance with GOST IEC61508 (IEC61508).
• complete absence of mechanical moving parts, which eliminates wear and significantly increases the service life.
< li>external vibrations and build-up do not affect the measurement result.
• for better integration into the control system, the device is equipped with various electronic inserts: NAMUR, thyristor, PFM, relay.
• display of erasure and formation deposits, setting delay and response density.
• detection of corrosion and deposits.
• threaded, flanged or Tri-Clamp process connection.
• Temperature value: - 50 - + 280°C.
• pressure value: - 1 - + 25bar.
• device length: 300-4000mm.
• international availability x certificates for use in hazardous areas.    .
• supply voltage: 19V – 55V DC/ 19V – 253V AC
• min product density: 10g/l

Robust point level switch with extension tube for fine-grained bulk solids also for hazardous areas.

Vibration Solids

Point level switch for fine grained solids and powder
Fork sensor
Universal
No calibration required
Not affected by build-up or external vibration
Robust
Switch value visible from outside
Tube extension

Build-up and corrosion detection
Remote version
3 temperature versions available
SIL 2

DC PNP 3-wire
AC 2-wire
19...253V AC / 19V...55V DC 2 relay contact
8/16mA
NAMUR
PFM

-50В°C ... 70В°C
(-60В°F ... 160 В°F)

-50В°C ... 280В°C
(-60 В°F ... 540В°F)

Vacuum ... 25 bar
(Vacuum ... 360 psi)

10 g/l (8 g/l on request)

selectable:
316L 3,2 Вµm
316L 0,8 Вµm
316L PTFE coated (to avoid build-up)
316L ETFE coated (to avoid corrosion)

Thread
R 1 1/2"
1 1/4" NPT
1 1/2" NPT
EN Flange DN50...DN100
ASME Flange 2"...4"
JIS Flange 50A...100A

Tri-Clamp ISO2852

300 ... 4000mm
(12 ... 155")
(6000mm / 230" on request)

DC PNP 2-wire
AC Thyristor
DPDT relay
8/16mA
NAMUR
PFM

ATEX, FM, CSA, CSA C/US, IEC Ex, JPN, INMETRO, NEPSI, EAC

SIL

EN 10204-3.1

Glass cover
Temperature spacer
EN10204-3.1

PFM: FTL325P, FTL375P
NAMUR: FTL325N, FTL375N

Grain size > 10mm (0.4")