Endress+Hauser Soliphant FTM52

Vibronic Point level detection

The Soliphant M FTM52 Level Gauge is a very rugged point level gauge with cable extension for use with loose fine-grained materials. It is possible to use it in explosive areas.

FTM 52 features an impact-resistant design for use in silos that contain powdered or fine-grained solids even at their low bulk density: chalk, cocoa, powdered dyes, cereals,  flour, feed, sugar.

The device has international certificates for use in dusty and hazardous areas with flammable gases. Also available with stainless steel body. steel and vibrating fork polished. Or an aluminum housing and a special coating on the vibration fork.

Maintenance-free.

The main advantages of the vibration level sensor:

• SIL 2 in accordance with IEC61508 (IEC61508).
• External vibrations and buildup do not affect the measurement result.
• Complete absence of mechanical moving parts, which eliminates wear and significantly increases the service life.
• for better integration into the control system, the device is equipped with various electronic inserts: NAMUR, thyristor, PFM, relay.
• display of erasure and deposit formation, adjustment delay and response density.
• international certificates for use in hazardous areas.
• temperature value: - 40 - + 80°C.
• detection of corrosion and build-up .
• Device length: 750-20000mm.
• Threaded, flanged or Tri-Clamp process connection.
• Pressure value: - 1 - + 2bar.< /li>
• tensile strength: 3000N.
• error: 0.15K.
• supply voltage: 10V – 55V DC.

Robust point level switch with rope extension for fine-grained bulk solids also for hazardous areas.

Vibration Solids

Point level switch for fine grained solids and powder
Fork sensor
Universal
No calibration required
Not affected by build-up or external vibration
Robust
Switch value visible from outside
Rope extension

Build-up and corrosion detection
Remote version
3 temperature versions available
SIL 2

10-55V DC PNP 3-wire
19-253V AC 2-wire
19...253V AC / 19...55V DC 2 relay contact
8/16mA
NAMUR
PFM

-50В°C ... 70В°C
(-60В°F ... 160В°F)

-40В°C ...80 В°C
(-40В°F ... 170В°F)

Vacuum ... 2 bar
(Vacuum ... 30 psi)
max. 6 bar / 80 psi for EExd/EExde

10 g/l (8g/l on request)

Sensor selectable:316L 3,2um
316L 0,8um
316L PTFE coated (to avoid build-up)
Rope: PUR, Silicon

3000 N

Thread
R 1 1/2"
1 1/4" NPT
1 1/2" NPT
EN Flange DN50...DN100
ASME Flange 2"...4"
JIS Flange 50A...100A

Tri-Clamp ISO2852

750....20000mm
(30...800")

DC PNP 2-wire
AC Thyristor
DPDT relay
8/16mA
NAMUR
PFM

ATEX, FM, CSA, CSA C/US, IEC Ex, JPN, INMETRO, NEPSI, EAC

SIL

Glass cover
Temperature spacerEN10204-3.1

PFM: FTL325P, FTL375P
NAMUR: FTL325N, FTL375N

Grain size > 10mm (0.4")