Endress+Hauser Proline t-mass B 150

Thermal mass flowmeter

Thermal mass flowmeter T-mass. Wide dynamic range of 150:1 and high sensitivity in the low flow region. Direct measurement of gas mass flow. Conversion of mass flow to volume flow under normal conditions without an additional calculator.

The flowmeter for cost-effective measurement and easy monitoring of utility gases.

20 to 720 000 kg/h (45 to 1 587 600 lb/h)
20 to 1 080 000 kg/h (45 to 2 381 400 lb/h)
(for air, depending on chosen option of ordering feature "Calibration flow")

40 to +100 В°C (40 to +212 В°F)

20 bar g (290 psi g)

Transducer: 1.4404 (316L)
Insertion tube: 1.4404 (316L); 1.4435 (316L)
Connection:
Compression fitting: 1.4404 (316L)
Sealing ring: EPDM; HNBR; 1.4401 (316)
Clamping ring: PEEK 450G

Thermal

The flowmeter for cost-effective measurement and easy monitoring of utility gases.
Suitable for air, nitrogen, carbon dioxide and argon in circular piping or rectangular ducts.

Optimal process monitoring easy measurement even at low pressures and flow velocities. Cost...effective measurement easy installation, negligible pressure loss and maintenance...free. Reliable flow trending multivariable measurement.
Insertion version for nominal diameter DN 80 to 1500 (3 to 60"). Installation and removal of sensor without process interruption. Easy installation.

Fast and efficient commissioning guided operating menus. High plant availability self...diagnostics and error monitoring. Automatic recovery of data for servicing.
Device in compact version with DC 24 V power supply. 4-20 mA HART, pulse/frequency/switch output. Compact and robust transmitter.

DN 80 to 1500 (3 to 60")

Transducer: 1.4404 (316L)
Insertion tube: 1.4404 (316L); 1.4435 (316L)
Connection:
Compression fitting: 1.4404 (316L)
Sealing ring: EPDM; HNBR; 1.4401 (316)
Clamping ring: PEEK 450G

Mass flow, temperature, corrected volume flow, FAD volume flow

3 % o.r.
4 % o.r.
5 % o.f.s.
(depending on chosen option of ordering feature "Calibration flow")

20 to 720 000 kg/h (45 to 1 587 600 lb/h)
20 to 1 080 000 kg/h (45 to 2 381 400 lb/h)
(for air, depending on chosen option of ordering feature "Calibration flow")

20 bar g (290 psi g)

40 to +100 В°C (40 to +212 В°F)

40 to +60 В°C (40 to +140 В°F)

AlSi10Mg, coated

IP66/67, type 4X enclosure

4...line display with push Buttons
Configuration via local display and operating tools possible

4...20 mA HART (active)
Pulse/frequency/switch output (passive)

Status input

HART

DC 18 to 30 V

ATEX, IECEx, cCSAus

Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR

CRN