Festo CPX-AP-I-4DI4DO-M8-3P
Remote I/O and network interface component

Festo CPX-AP-I-4DI4DO-M8-3P
We ship to United States of America!

Festo CPX-AP-I

Item Number: CPX-AP-I-4DI4DO-M8-3P
195.87
-
+
Total price: 195.87
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
The price and delivery terms is not final. Please check with the manager.
Contact our experts
  • Overview +
  • Comments +

Festo CPX-AP-I Remote I/O and network interface component.

CPX-AP-I-4DI4DO-M8-3P Datasheet:

Dimensions (W x L x H)30 x 170 x 35 mm
Type of mountingOn H-rail via accessoriesWith through-hole
Product weight129 g
Ambient temperature-20 °C ... 50 °C
Storage temperature-40 °C ... 70 °C
Relative air humidity5 - 95%Non-condensing
Degree of protectionIP65IP67
Note on degree of protectionUnused connections sealed
Corrosion resistance class CRC1 - Low corrosion stress
Max. cable length30 m outputs30 m inputs50 m system communication
Note on max. cable lengthPower supply according to nominal voltage
LABS (PWIS) conformityVDMA24364-B2-L
CE mark (see declaration of conformity)To EU EMC Directive
CE marking (see declaration of conformity)To UK instructions for EMC
KC markKC-EMV
ApprovalRCM trademarkc UL us listed (OL)
Certificate issuing authorityUL E239998
Note on materialsRoHS-compliant
Material housingPAPCDie-cast zinc, nickel-plated
Material o-ringFPM
Diagnostics via LEDDiagnostics per moduleLoad power supplyStatus per channel
Diagnostics per internal communicationLoad switch-offShort-circuit/overload in output signalShort circuit/overload in sensor supplyElectronics/sensors overvoltageLoad overvoltageElectronics/sensors undervoltageLoad undervoltage
Number of outputs4
Communication interface, functionSystem communication XF10 IN / XF20 OUT
Communication interface, connection type2x socket
Communication interface, connection technologyM8x1, D-coded according to EN 61076-2-114
Communication interface, number of pins/wires4
Communication interface, protocolAP
Communication interface, shieldingyes
Power supply, functionIncoming electronics/sensors and load
Power supply, connection typePlugs
power supply, connection systemM8x1, A-coded to EN 61076-2-104
Power supply, number of pins/wires4
Power transmission, functionOutgoing electronics/sensors and load
Power transmission, connection typeSocket
Power transmission, connection technologyM8x1, A-coded to EN 61076-2-104
Power transmission, number of pins/wires4
Note regarding operating voltageSELV/PELV fixed power supplies requiredNote voltage drop
Nominal operating voltage DC of load24 V
Permissible voltage fluctuation of load± 25 %
Nominal DC operating voltage, electronics/sensors24 V
Permissible voltage fluctuations for electronics/sensors± 25%
Max. power supply2 x 4 A (external fuse required)
Intrinsic current consumption at nominal operating voltage for electronics/sensorsTypically 35 mA
Intrinsic current consumption at nominal operating voltage loadTypically 10 mA
Power failure bridging10 ms
Reverse polarity protectionyes
Electrical connection input, functionDigital input
Electrical connection input, connection type4x socket
Electrical connection input, connector systemM8x1, A-coded to EN 61076-2-104
Electrical connection input, number of connections/cores3
Number of inputs4
Characteristic for inputsTo IEC 61131-2, type 3
Switching levelSignal 0: <= 5 VSignal 1: >= 11 V
Switching logic for inputsPNP (positive switching)2-wire sensors to IEC 61131-23-wire sensors to IEC 61131-2
Input debounce time0.1 ms3 ms10 ms20 ms
Fuse protection of inputs (short circuit)Internal electronic fuse per module
Max. residual current of inputs per module1.8 A
Electrical isolation of inputs between channelsno
Electrical isolation of inputs between channel - internal communicationyes
Electrical connection output, functionDigital output
Electrical connection output, connection type4x socket
Electrical connection output, connector systemM8x1, A-coded to EN 61076-2-104
Electrical connection output, number of connections/cores3
Characteristic for outputsAccording to IEC 61131-2, type 0.5
Switching logic for outputsPNP (positive switching)
Fuse protection of outputs (short circuit)Internal electronic fuse per channel
Output delay with ohmic loadSignal change 0->1: < 200 µsSignal change 1->0: < 200 µs
Max. residual current outputs per module2 A
Electrical isolation of outputs between channelsno
Electrical isolation of outputs between channel - internal communicationyes
Max. power supply per channel0.5 A

Buy Festo CPX-AP-I-4DI4DO-M8-3P with the best possible price and delivery terms on eltra-trade.com

eltra-trade.com provides top-quality industrial control components. Our online catalog features a wide range of products to meet your specific requirements. Enjoy the convenience of consolidated shipments and competitive pricing. Join our satisfied customers who rely on us for their automation solutions.