Festo CPX-E-CEC-M1
Remote I/O and network interface component
We ship to United States of America!
Festo CPX-E
Item Number:
CPX-E-CEC-M1
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
Contact our experts
- Overview +
- Comments +
Festo CPX-E Remote I/O and network interface component.
CPX-E-CEC-M1 Datasheet:
| Dimensions (W x L x H) | 42.2 mm x 76.5 mm x 125.8 mm |
| Grid dimension | 18.9 mm |
| Type of mounting | With H-rail |
| Max. number of modules | 10 |
| Product weight | 145 g |
| Mounting position | VerticalHorizontal |
| Ambient temperature | -5 °C ... 50 °C |
| Note on ambient temperature | -5 - 60°C for vertical installation |
| Storage temperature | -20 °C ... 70 °C |
| Relative air humidity | 95 %Non-condensing |
| Degree of protection | IP20 |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Protection against direct and indirect contact | PELV |
| LABS (PWIS) conformity | VDMA24364 zone III |
| CE mark (see declaration of conformity) | To EU EMC DirectiveIn accordance with EU RoHS Directive |
| CE marking (see declaration of conformity) | To UK instructions for EMCTo UK RoHS instructions |
| KC mark | KC-EMV |
| Approval | RCM trademarkc UL us listed (OL) |
| Certificate issuing authority | UL E239998 |
| Note on materials | RoHS-compliant |
| Material housing | PA |
| Diagnostics via LED | Force modeModule statusNetwork status, engineering port 1EtherCAT® network statusRunPower supply, electronics/sensorsLoad power supplySystem fault |
| Operator controls | DIL switch for RUN/STOP |
| IP address setting | DHCPVia CODESYS |
| Fieldbus interface | Ethernet |
| Field bus, protocol | EtherCAT®EtherCAT CoEEtherCAT EoEEtherCAT FoEEtherCAT Master |
| Fieldbus interface, function | Outgoing bus connection |
| Field bus, connection type | Socket |
| Field bus, connection system | RJ45 |
| Fieldbus interface, connection pattern | 00995789 |
| Field bus, connection pattern | 8 |
| Field bus interface, electrical isolation | yes |
| Field bus interface, transmission rate | 100 Mbit/s |
| Ethernet interface, connection type | Socket |
| Ethernet interface, protocol | EasyIPModbus® TCPOPC UATCP/IP |
| Ethernet interface, function | Diagnostics |
| Ethernet interface, connection system | RJ45 |
| Ethernet interface, connection pattern | 00995789 |
| Ethernet interface, number of pins/wires | 8 |
| Ethernet interface, transmission rate | 10 Mbit/s100 Mbit/s |
| Max. address volume, inputs | 64 Byte |
| Max. address volume, outputs | 64 Byte |
| System parameters | Diagnostic memoryFail-safe responseSystem start |
| Module parameters | Channel alarms bundlingUndervoltage diagnosticsChannel alarms for undervoltageProcess value representation of analogue modules |
| Configuration support | CODESYS V3 |
| Additional functions | CoDeSys V3 with SoftMotion |
| CPU data | 128 MB RAMDual Core 650 MHz |
| Power supply, function | Electronics and sensors |
| Power supply, connection type | Terminal strip |
| Power supply, note on connection type | > 4 A and UL 2x terminal strip for power supply |
| power supply, connection system | Spring-loaded terminal |
| Power supply, connection pattern | 00995847 |
| Power supply, number of pins/wires | 4 |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Permissible voltage fluctuations for electronics/sensors | ± 25% |
| Power supply, conductor diameter | 0.2 mmІ ... 1.5 mmІ |
| Power supply, note on conductor diameter | 0.2 - 2.5 mmІ for flexible conductors without wire end sleeves |
| Max. power supply | 8 A |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 65 mA |
| Power failure bridging | 20 ms |
| Reverse polarity protection | 24 V sensor supply against 0 V sensor supply |
| Programming software | CODESYS provided by Festo |
| Program memory | 12 MB user program |
| Processing time | Approx. 200 µs/1 k instruction |
| Function modules | And othersRead CPX-E module diagnosticsCPX-E diagnostic statusCopy CPX-E diagnostic trace |
| Buffering time real-time clock | 3 Weeks |
| Flag | 120 kB retentive dataCODESYS variable concept |
Buy Festo CPX-E-CEC-M1 with the best possible price and delivery terms on eltra-trade.com
Discover a wide range of industrial electrical products at eltra-trade.com. We specialize in finding any part you need and providing prompt delivery. Benefit from our premium quality products and competitive prices. Partner with us for your electrical supply needs and experience outstanding service.
People also buy
Comments
No comments yet