Festo SME-10M-DS-24V-E-0,3-L-M8D

Proximity sensor

Out of stock

Festo SME proximity sensor is a cylindrical switch with magnetic reed contact for a circular groove. Designed for installation in a round groove. It is installed in the groove from above or longitudinally.\

Reed position sensors contain a sealed contact that reacts to the approach of a magnetic field, which causes a change in the output signal. SME sensors are mainly used where high load currents need to be switched (eg direct control of electrical output devices).

The body of the SME-10 sensors is made of alloyed stainless steel and PPS (polyphenylene sulfide, "ceramic plastic"). The cable sheath material is thermoplastic polyurethane.

Datasheet:

• Series: SME-10M
• Measuring principle: magnetic tongue
• Ambient temperature: -40 ... +70 °С
• Repeat accuracy: 0.2 mm
• Output signal: contact, bipolar
• Switching frequency: up to 50 Hz
• Output current: up to 300mA
• Voltage drop: up to 1.5 V
• Short circuit protection: no
• Overload protection: no
• Rated operating voltage: 24 VDC
• Supply voltage: 5 to 30 VDC / 5 to 30 VAC
• Reverse Polarity Protection: No
• Cable length: 0.3 m
• Weight: 6.7g
• Degree of protection: IP65, IP68
• Body type: rectangular
• Body material: plastic
• Output signal: digital
• Measured value: Position
• Method of measurement: reed switch
• Measuring principle: Magnetic
• Discrete output repeatability: 0.1 mm
• Output signal: Bipolar
• Turn-on time: <= 1.2 ms
• Shutdown time: <= 1ms
• exit direction: Axial
• The optimal solution for: Pneumatic cylinders
• Max tightening torque: 0.4 Nm
• Type of electrical connection
• Plug with cable according to EN 61076-2-104
• Electrical connection: M8x1
• Number of contacts: 3-core
• Output Electrical Status: N. O. contact
• Maximum switching power: 9 VA / 9 W
• Voltage drop: <=1.5V
• Maximum output current of mounting accessories: 50 mA
• Maximum switching power in accessories: 1.5VA / 1.5W
• Housing material: PA (Polyamide) with reinforcement Stainless steel alloy