Keyence FD-G125

Gas Flow Meter

Keyence FD-G125 flow meter is a clamp-on gas flow meter used on stainless steel and iron pipes. Measures the flow of compressed air, nitrogen and other gases.

Technical characteristics:

• Series: FD-G
• Supported pipe diameter: 4 inches ( 100 A), ø111 - ø117 mm - 5 inches (125 A), ø138 - ø144 mm
• Rated flow: 7800 l/min, 280 cfm, 470 m³/h (100 A pipe )- 12,000 l/min, 420 cfm, 720 m³/h (125 A pipe)
• Standard flow:
  • At 60 psi (0. 41 MPa): 1326.34 cfm (100 A pipe) - 1989.51 cfm (125 A pipe)
  • At 80 psi (0.55 MPa): 1681.49 cfm (100 A pipe) - 2522.23 cfm (125 A pipe)
  • At 100 psi (0.69 MPa) ): 2036.63 cfm (100 A pipe) - 3054.95 cfm (125 A pipe)
  • At 120 psi (0.83 MPa) : 2391.78 CFM (100 A pipe) - 3587.67 CFM (125 A pipe)
• Display: QVGA 2.2- inch color LCD monitor
• Measurement accuracy: ± 1-2% of full scale
• I/O wiring port: M12 4-pin male
• li>Control output (channel 1 / channel 2): NPN or PNP, open collector up to 30 V DC. current, up to 100 mA / channel, residual voltage up to 2.5 V
• Analog output (channel 2): from 4 to 20 mA / from 0 to 20 mA, load resistance up to 500 Ohm
• External input (channel 2): short circuit current up to 1.5 mA, input time from 20 ms
• Data transfer: USB, Modbus TCP, EtherNet/IP, IO-Link
• Supply voltage: 20 to 30 V DC. current
• Protection class: IP65 / IP67
• Weight: 2.7 kg
• Type: flow sensors
• Measurement medium: gas
• Output signal: protocol