Keyence FD-G200

Gas Flow Meter

The Keyence FD-G200 flow meter is a clamp-on gas flow meter used on stainless steel and iron pipes. Measures the flow of compressed air, nitrogen and other gases.

Technical characteristics:

• Series: FD-G
• Supported pipe diameter: 6 inches ( 150 A), ø163 - ø171 mm - 8 inches (200 A), ø214 - ø222 mm
• Rated flow: 17000 l/min, 600 cfm, 1000 m³/h (150 A pipe )- 30,000 l/min, 1,100 cfm, 1,800 m³/h (200 A pipe)
• Standard flow:
  • At 60 psi (0. 41 MPa): 2842.15 cfm (150 A pipe) - 5210.62 cfm (200 A pipe)
  • At 80 psi (0.55 MPa): 3603.18 cfm (150 A pipe) - 6605.84 cfm (200 A pipe)
  • At 100 psi (0.69 MPa) ): 4364.21 cfm (150 A pipe) - 8001.06 cfm (200 A pipe)
  • At 120 psi (0.83 MPa) : 5125.24 CFM (150 A pipe) - 9396.28 CFM (200 A pipe)
• Display: QVGA 2.2- inch color LCD monitor
• Measurement accuracy: ± 1-2% of full scale
• I/O wiring port: M12 4-pin male
• Control output (channel 1 / channel 2): NPN or PNP, open collector up to 30 V DC. current, up to 100 mA / channel, residual voltage up to 2.5 V
• Analog output (channel 2): from 4 to 20 mA / from 0 to 20 mA, load resistance up to 500 Ohm
• External input (channel 2): short circuit current up to 1.5 mA, input time from 20 ms
• Data transfer: USB, Modbus TCP, EtherNet/IP, IO-Link
• Supply voltage: 20 to 30 V DC. current
• Protection class: IP65 / IP67
• Weight: 2.8 kg
• Type: flow sensors
• Measurement medium: gas
• Output signal: protocol