Omron C200H-TC103

Module

C200H-TC103

Temperature control in controllers is carried out according to the PID control law and is a highly accurate process. Parameters are displayed and configured using the C200H-DSC01 data setup console.

Main features of the C200H-TC103 modules

Auto-adjustment of PID control constants
The controller receives data from JPt100 type thermistors and Pt100. Customization for each type of sensor is made by customer selection
High-speed and high-precision control is ensured by 500 ms sampling time and 0.5% indication accuracy
Eight data values, such as basic setting, alarm setting, input range setting , can be set for each data bank. Data banks can be switched between each other during the process
In all modes it is possible to program the output parameters: upper limit, lower limit and upper/lower limit
The heating current is measured by a special transformer, thereby eliminating the possibility of emergency overheating of the module< /p>

Technical characteristics of modules C200H-TC103

Output signal: current
Current transformer for detecting heating current: from 0.1 A to 49.9 A (with peak value detection function ), indication accuracy ±0.5% FS
Number of inputs: 2 (two loops, each of which consists of a signal from a sensor and a current transformer)
Control modes: PID, on/off (adjustable on the rear panel), (advanced features: PID law with auto-tuning)
Display accuracy: 0.5% of the entered value
Measurement time: from 1 to 99 s
Sampling time: 500 ms
Measurement temperature: 100..1000 C
Number of data banks: 8
Internal power consumption: 5 VDC, 0.33 A
External power consumption: 24 VDC, 0.2 A
Weight: 360 g

• Expansion type: temperature
• Number of channels: 2
• Series:C200H