Pepperl+Fuchs BB10-P-F1/25/33/35/103/115-7m Thru-beam sensor

Pepperl+Fuchs BB10-P-F1/25/33/35/103/115-7m
Item Number: BB10-P-F1/25/33/35/103/115-7m
  • Single-beam miniature photoelectric sensor, ideal for installing in frames or contours
  • Integrated circuit
  • Plug-in style housing for 13 mm hole
  • Narrow opening angle, suitable for mounting in pairs
  • Various frequencies for avoiding mutual interference (cross-talk immunity)
  • Light on version
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Connection7 m fixed cable
Receiver: grey ; Emitter: black
UN/ECE Regulation No. 10 (E1)Type-approval number: 036938
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F) , fixed
-20 ... 60 В°C (-4 ... 140 В°F) , movable
Degree of protectionIP67
Operating voltage10 ... 30 V DC
Mission Time (TM)20 a
Optical facefrontal
CCC approvalCCC approval / marking not required for products rated 36 V
Response time5 ms
Function indicatorLED red: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted
Effective detection range0 ... 3 m
MTTFd795 a
Switching currentmax. 100 mA
Switching typelight on
Angle of divergenceEmitter: +/- 3 В° Receiver: +/- 10 В° at max. sensing range ; typical
Diagnostic Coverage (DC)0 %
Relative humidity90 % , noncondensing
Light typemodulated infrared light , 880 nm
Switching voltagemax. 30 V DC
Massapprox. 100 g per device
Switching frequency100 Hz
Threshold detection range4 m
Ambient light limithalogen light 100000 Lux ; according to EN 60947-5-2:2007
ReceiverBB10-R-F1/25/33/35/103/115-7m
No-load supply currentEmitter: 20 mA
Receiver: 10 mA
Diameter of the light spotapprox. 350 mm at a distance of 3 m
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Light sourceIRED
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Voltage drop 1.5 V DC
EmitterBB10-T-F1/33/35/115-7m

Comments

No comments yet

Write a comment

in international format without spaces
All fields are required