Pepperl+Fuchs CBN15-18GS75-E2-V1 Capacitive sensor
Item Number: CBN15-18GS75-E2-V1
- 15 mm non-flush
- The switching distance can be set over a wide range with the potentiometer
- Overview
- Datasheet
- Alternative numbers
- Comments
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Rated operating distance | 2 ... 15 mm |
| Degree of protection | IP67 |
| Switching frequency | 0 ... 100 Hz |
| Potentiometer | sensitivity adjustment |
| Output type | 3-wire |
| Operating voltage | 10 ... 30 V |
| Temperature drift | max. 20 % at -5 ... 55 В°C (23 ... 131 В°F) |
| Short-circuit protection | pulsing |
| Time delay before availability | max. 300 ms |
| Output type | PNP |
| Installation | non-flush |
| Ambient temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| Voltage drop | 1.5 V |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Diagnostic Coverage (DC) | 0 % |
| Switching function | Normally open (NO) |
| LED yellow | indication switching state |
| Output polarity | DC |
| Sensing face | PBT |
| Connection type | Connector plug M12 x 1 , 3-pin |
| Operating current | 0 ... 100 mA |
| UL approval | cULus Listed, General Purpose |
| No-load supply current | 15 mA |
| Reverse polarity protection | reverse polarity protected |
| LED green | Operating display |
| MTTFd | 226 a |
| Mission Time (TM) | 20 a |
Comments
No comments yet