Pepperl+Fuchs CJ10-30GM-WS
Capacitive sensor
- 10 mm non-flush
- The switching distance can be set over a wide range with the potentiometer
Item Number:
CJ10-30GM-WS
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Potentiometer | sensitivity adjustment |
| Core cross-section | 0.75 mm2 |
| Output type | Two-wire |
| Reverse polarity protection | reverse polarity tolerant |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Momentary current (20 ms, 0.1 Hz) | 0 ... 1200 mA |
| Off-state current | 0.7 ... 1.5 mA typ. |
| Output type | 2-wire |
| Hysteresis | 2 ... 10 typ. 5 % |
| Switching state indicator | LED, yellow |
| Sensing face | PBT |
| CCC approval | Certified by China Compulsory Certification (CCC) |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Connection type | cable PVC , 2 m |
| Assured operating distance | 0 ... 7.2 mm |
| Note | 1) In the temperature range below 0 В°C, permissible operating voltage Ub 80...253 V Safety fuse 0.8 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. |
| Operating current | 5 ... 200 mA |
| Storage temperature | -25 ... 85 В°C (-13 ... 185 В°F) |
| Switching function | Normally open (NO) |
| Time delay before availability | 300 ms |
| Lowest operating current | 5 mA |
| Rated insulation voltage | 1500 V |
| Installation | non-flush |
| Degree of protection | IP67 |
| Operating voltage | 20 ... 253 V AC 1) |
| Switching frequency | 0 ... 10 Hz |
| Rated operating distance | 10 mm |
| UL approval | cULus Listed, General Purpose |
| Output polarity | AC |
Comments
No comments yet