Pepperl+Fuchs CJ15+U1+A2
Capacitive sensor
- 15 mm flush
- 4-wire DC
- The switching distance can be set over a wide range with the potentiometer
Item Number:
CJ15+U1+A2
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
CCC approval | CCC approval / marking not required for products rated 36 V |
Output type | PNP |
MTTFd | 750 a |
UL approval | cULus Listed, General Purpose |
Core cross-section | up to 2.5 mm2 |
Rated operating distance | 15 mm |
Operating current | 0 ... 200 mA |
Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
Reverse polarity protection | reverse polarity protected |
Installation | flush |
Voltage drop | 3 V |
Switching frequency | 0 ... 10 Hz |
Note | Tightening torque: 1.8 Nm (housing) |
Operating voltage indicator | LED, green |
Short-circuit protection | pulsing |
Connection type | screw terminals |
Mission Time (TM) | 20 a |
Switching function | complementary |
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
Sensing face | PBT |
Operating voltage | 10 ... 30 V DC |
Housing material | PBT |
Assured operating distance | 0 ... 10.8 mm |
Degree of protection | IP65 |
No-load supply current | 20 mA |
Output type | 4-wire |
CSA approval | cCSAus Listed, General Purpose |
Diagnostic Coverage (DC) | 0 % |
Switching state indicator | LED, yellow |
Output polarity | DC |
People also buy
Comments
No comments yet