Pepperl+Fuchs CJ40-FP-A2-P4 Capacitive sensor
Item Number: CJ40-FP-A2-P4
- 40 mm non-flush
- 4-wire DC
- The switching distance can be set over a wide range with the potentiometer
- Overview
- Datasheet
- Alternative numbers
- Comments
| Installation | non-flush |
| Operating current | 0 ... 200 mA |
| Hysteresis | 3 ... 20 % 10 % typical |
| CSA approval | cCSAus Listed, General Purpose |
| Sensing face | POM |
| Switching frequency | 0 ... 10 Hz |
| Operating voltage | 10 ... 60 V DC |
| No-load supply current | ≤ 20 mA |
| Output polarity | DC |
| Potentiometer | sensitivity adjustment |
| Rated operating distance | 40 mm |
| Switching function | complementary |
| Connection type | screw terminals |
| Housing material | POM / metal |
| Assured operating distance | 0 ... 32.4 mm |
| Voltage drop | ≤ 3 V |
| Reverse polarity protection | reverse polarity protected |
| Output type | PNP |
| Short-circuit protection | pulsing |
| Degree of protection | IP65 |
| Switching state indicator | LED, yellow |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Core cross-section | up to 2.5 mm2 |
| UL approval | cULus Listed, General Purpose |
Comments
No comments yet