Pepperl+Fuchs DAD30/35
Optical data coupler
- Compact, flat aluminum housing
- 3 interfaces in a device can be selected via DIP switches
- Infrared light
- Mating connector with protective cover included delivery
- Overview
- Comments
| Product standard | EN 60947-5-2 |
| Light source | IRED |
| Interface type | RS 232, RS 422, CL20 mA active/passive switchable |
| Light type | modulated infrared light |
| Connection | 25-pin Sub-D connector |
| Measurement output | +1.8 ... 5.8 V DC, max. 10 mA, simple stability control: 2.5 V triple stability control: 4.2 V |
| Effective detection range | 0 ... 100 m |
| Threshold detection range | 150 m |
| Response delay | 40 µs |
| Diameter of the light spot | 1800 mm at a distance of 100 m |
| Function indicator | LED red: switch point LED green: sufficient stability control |
| Mass | 500 g |
| Control elements | 8-fold DIP-switch for selection of transmission frequency and interface |
| Data sampling blanking | Input for incoming data blanking with +24 V DC |
| Transmission mode | FSK |
| Ambient temperature | -20 ... 60 В°C (-4 ... 140 В°F) |
| Data rate | 0 ... 19.2 kBit/s |
| Pre-fault indication output | 2 PNP-outputs, short-circuit protected, 30 V DC 0.1 A activated for single or sufficient stability control |
| Storage temperature | -20 ... 75 В°C (-4 ... 167 В°F) |
| Ambient light limit | 30000 Lux |
| Operating voltage | 24 V DC В± 25 % |
| Angle of divergence | Emitter: 1 В° Receiver: 5 В° |
| Operation frequency | F1 = 83 kHz F2 = 118 kHz |
| Approvals | CE |
| Alignment aid | with function display |
| Degree of protection | IP65 |
| No-load supply current | 200 mA |
Comments
No comments yet