Pepperl+Fuchs ECA10TL - EtherCAT
Cable pull rotary encoder
- Solid yet lightweight plastic construction
- Compact, slim design (the shaft of the mounted rotary encoder is used to provide the function of the drum bearing)
- Coupling-free adaptation
- Wide range of mounting options
- Rust and acid-resistant measuring cable
- Very high level of linearity and repeatability
- EtherCAT interface
- Free of wear magnetic sampling
- Overview
- Comments
| Storage temperature | -30 ... 70 В°C (-22 ... 158 В°F) |
| Detection type | magnetic sampling |
| Emitted interference | EN 61000-6-4:2007 |
| Operating voltage | 10 ... 30 V DC |
| Code course (counting direction) | adjustable |
| Ambient temperature | -30 ... 70 В°C (-22 ... 158 В°F) |
| Relative humidity | 98 % , no moisture condensation |
| Power consumption | approx. 4 W |
| Degree of protection | acc. DIN EN 60529 |
| Noise immunity | EN 61000-6-2:2005 |
| Operating temperature | -30 ... 70 В°C (-22 ... 158 В°F) |
| Connector | Ethernet: 2 sockets M12 x 1, 4-pin, D-coded Supply: 1 plug M12 x 1, 4-pin, A-coded |
| Output code | binary code |
| Transfer rate | 10 MBit/s / 100 MBit/s |
| Climatic testing | DIN EN 60068-2-3, no moisture condensation |
| Rope diameter | 0.55 mm |
| Device type | Target line with EtherCAT interface |
| Measuring range | 3000 ... 10000 mm |
| Life span | up to 106 Cycles |
| Resolution | Cable pull: 80 mm design: 0,028 mm 130 mm design: 0,047 mm 190 mm design: 0,068 mm Encoder: 25 Bit (13 Bit/revolution) |
| Construction type | 80 mm, 130 mm, 190 mm |
Comments
No comments yet