Pepperl+Fuchs ENA42HD-S***-J1939
Absolute encoders
- Solid shaft
- Up to 31 bit overall resolution
- CAN bus with SAE J1939 protocol
- Free of wear magnetic sampling
- High resolution and accuracy
- Highly shock / vibration and soiling resistant
- Sturdy construction
- Increased shaft load capacity
- Stainless steel housing
- IP69K
- Overview
- Comments
Transfer rate | min. 20 kBit/s , max. 1 MBit/s |
Rotational speed | max. 6000 min -1 |
Time delay before availability | < 250 ms |
Connector | M12 connector, 5 pin |
Relative humidity | 98 % , no moisture condensation |
Linearity error | В± 0.1 В° |
Operating temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
L10 | 10 E+8 revolutions |
Detection type | magnetic sampling |
Output code | binary code |
Device type | Absolute encoders |
Cycle time | 1 ms |
Vibration resistance | DIN EN 60068-2-6, 30 g, 10 ... 1000 Hz |
UL File Number | E223176 ""For use in NFPA 79 Applications only"" , if UL marking is marked on the product. |
Shock resistance | DIN EN 60068-2-27, 300 g, 6 ms |
Diagnostic Coverage (DC) | 0 % |
Operating voltage | 9 ... 30 V DC (with galvanic isolation) |
Starting torque | < 5 Ncm |
MTTFd | 480 a at 40 В°C |
Noise immunity | EN 61000-6-2:2005 |
Standard conformity | ISO 11898 |
Interface type | J1939 |
Cable | andempty;6 mm, 4 x 2 x 0.14 mm2 |
LED green | Operating mode |
Emitted interference | EN 61000-6-4:2007 |
LED red | wrong baud rate |
Code course (counting direction) | adjustable |
Moment of inertia | 30 gcm2 |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Power consumption | 1 W |
Climatic testing | DIN EN 60068-2-3, no moisture condensation |
UL approval | cULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product. |
Mission Time (TM) | 20 a |
Mass | approx. 350 g |
Degree of protection | DIN EN 60529 , IP66 / IP68 / IP69K |
People also buy
Comments
No comments yet