Pepperl+Fuchs ENA58IL-R***-ProfiNET
Absolute encoders
- Recessed hollow shaft
- 30 Bit multiturn
- Free of wear magnetic sampling
- High resolution and accuracy
- Mechanical compatibility with all major encoders with fieldbus interface
- Status LEDs
- Overview
- Comments
| UL File Number | E223176 ""For use in NFPA 79 Applications only"" , if UL marking is marked on the product. |
| Transfer rate | 100 MBit/s |
| Interface type | PROFINET IO |
| Detection type | magnetic sampling |
| Climatic testing | DIN EN 60068-2-3, no moisture condensation |
| Rotational speed | max. 12000 min -1 for IP65 max. 3000 min -1 for IP66/IP67 |
| MTTFd | 130 a at 40 В°C |
| Mass | approx. 300 g |
| Code course (counting direction) | programmable, cw ascending (clockwise rotation, code course ascending) cw descending (clockwise rotation, code course descending) |
| Moment of inertia | 50 gcm2 |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Degree of protection | DIN EN 60529, IP65, IP66, IP67 |
| Device type | Absolute encoders |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product. |
| Starting torque | < 5 Ncm |
| Vibration resistance | DIN EN 60068-2-6, 10 g, 10 ... 1000 Hz |
| Operating temperature | -40 ... 70 В°C (-40 ... 158 В°F) for model without connection cover -40 ... 85 В°C (-40 ... 185 В°F) for model with connection cover |
| L10 | 5 E+8 revolutions at 24/198 N axial/radial shaft load |
| Cycle time | 1 ms |
| Output code | binary code |
| Power consumption | approx. 4 W |
| Shock resistance | DIN EN 60068-2-27, 100 g, 6 ms |
| Emitted interference | EN 61000-6-4:2007 |
| Time delay before availability | < 250 ms |
| Linearity error | В± 0.1 В° |
| Diagnostic Coverage (DC) | 0 % |
| Relative humidity | 98 % , no moisture condensation |
| Noise immunity | EN 61000-6-2:2005 |
| Mission Time (TM) | 20 a |
| Operating voltage | 10 ... 30 V DC |
| Connector | Ethernet: 2 sockets M12 x 1, 4-pin, D-coded Supply: 1 plug M12 x 1, 4-pin, A-coded |
Comments
No comments yet