Pepperl+Fuchs ENA58IL-S***-SSI
Absolute encoders
- Solid shaft
- SSI interface
- Up to 32 Bit multiturn
- Free of wear magnetic sampling
- High resolution and accuracy
- Additionally push buttons for preset function (only model characteristic SB2, SG2)
- Up to 4096 pulses on incremental track
- Overview
- Comments
| No-load supply current | typ. 50 mA |
| Device type | Absolute encoders |
| Emitted interference | EN 61000-6-4:2007 |
| Input type | zero-set (PRESET 1) with falling edge |
| Shock resistance | DIN EN 60068-2-27, 200 g, 6 ms |
| Vibration resistance | DIN EN 60068-2-6, 20 g, 10 ... 1000 Hz |
| Switch-on delay | < 250 ms |
| Code course (counting direction) | adjustable |
| Moment of inertia | 50 gcm2 |
| UL File Number | E223176 ""For use in NFPA 79 Applications only"" , if UL marking is marked on the product. |
| Relative humidity | 98 % , no moisture condensation |
| Output type | RS422, Push/Pull |
| Input current | < 6 mA |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product. |
| Output code | Gray code, binary code |
| Operating temperature | cable, flexing: -5 ... 70 В°C (23 ... 158 В°F), cable, fixed: -30 ... 70 В°C (-22 ... 158 В°F) connector models: -40 ... 85 В°C (-40 ... 185 В°F) |
| Transfer rate | 0.1 ... 2 MBit/s |
| Operating voltage | 4.5 ... 30 V DC (SSI, SSI + RS422) ; 10 ... 30 V DC (SSI + Push/Pull) |
| Mass | approx. 300 g , with cable |
| Mission Time (TM) | 20 a |
| Rotational speed | max. 12000 min -1 |
| Pulses | 1024, 2048, 4096 |
| Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
| Climatic testing | DIN EN 60068-2-3, no moisture condensation |
| Standard conformity | RS 422 |
| Noise immunity | EN 61000-6-2:2005 |
| Interface type | SSI ; SSI + incremental track |
| Signal output | A+B+/A+/B |
| Connector | M12 connector, 8-pin or M23 connector, 12-pin |
| MTTFd | 700 a at 40 В°C |
| Input type | Selection of counting direction (cw/ccw) |
| Diagnostic Coverage (DC) | 0 % |
| Degree of protection | DIN EN 60529, IP65 or IP67 (not for M23 device plug) |
| Signal duration | min. 1.1 s |
| Input current | < 6 mA |
| Cycle time | < 100 micro/s |
| Cable | andempty;7 mm, 6 x 2 x 0.14 mm2, 1 m (cable length, see order code) |
| L10 | 55 E+8 revolutions at 40/110 N axial/radial shaft load |
| Linearity error | В± 0.1 В° |
| Power consumption | approx. 1.5 W |
| Detection type | magnetic sampling |
| Time delay before availability | < 450 ms |
| Starting torque | < 5 Ncm |
Comments
No comments yet