Pepperl+Fuchs FB8206*
EasyCom Com Unit for PROFIBUS DP/DP-V1
We ship to United States of America!
- Interface between the I/O modules and the PCS/PLC
- Com unit for 80 analog or 184 digital channels
- Communication via PROFIBUS DP
- Installation in suitable enclosures in Zone 1
- Module can be exchanged under voltage (hot swap)
- HART communication via PROFIBUS DP V1 or service bus
- Configuration via GSD parameters from the control system
- Non-volatile memory for configuration and parameter settings
- Self configuration in redundant systems
- Permanently self-monitoring
- Outputs drive to safe state in case of failures
Item Number:
FB8206*
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
Contact our experts
- Overview +
- Comments +
| Number of stations per bus segment | max. 31 (RS-485 standard) |
| Dimensions | 57 x 107 x 132 mm (2.2 x 4.2 x 5.2 inch) |
| Bus length | max. 1000 m (FOL, 1.5 MBaud), max. 1000 m (copper cable, 187.5 kBd), max. 200 m (copper cable, 1.5 MBd) |
| Storage temperature | -25 ... 85 ?°C (-13 ... 185 ?°F) |
| Relative humidity | 95 % non-condensing |
| Cyclic process data | 240 bytes input and (simultaneously) 240 bytes output |
| Addressing | via configuration software |
| Number of stations per bus line | max. 125 (PROFIBUS), max. 119 (service bus) |
| Power consumption | 2 W |
| Fieldbus type | PROFIBUS DP/DP-V1 |
| PROFIBUS address | 0 ... 126 (factory standard setting: 126) |
| Ambient temperature | -20 ... 60 ?°C (-4 ... 140 ?°F) |
| LED indicator | LED green (power supply): On = operating, fast flash = cold start LED red (collective alarm): On = internal fault, flashing = no PROFIBUS connection LED yellow (operating mode): flashing 1 (1:1 ratio) = active, normal operation; flashing 2 (7:1 ratio) = active, simulation |
| Electromagnetic compatibility | NE 21 |
| Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 |
| Connection | backplane bus |
| EAC approval | Russia: RU C-IT.MIII06.B.00129 |
| Number of repeaters between Master and Slave | max. 3 |
| Connection | backplane bus |
| Degree of protection | IEC 60529 |
| EU-Type Examination Certificate | PTB 97 ATEX 1074 U |
| Redundancy | via front connector |
| Supported I/O modules | all FB remote I/O modules |
| Mass | approx. 750 g |
| HART communication | via PROFIBUS or service bus |
| Vibration resistance | frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ?± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ?± 1 mm/0.7 g; 90 minutes at each resonance |
| Rated voltage | 5 V DC , only in connection with the power supplies FB92** |
| Degree of protection | IP20 (module) , a separate housing is required acc. to the system description |
| GSE file | CGV61711.gsd/gse |
| Connection | via backplane |
| Shock resistance | shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18 |
Buy Pepperl+Fuchs FB8206* with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. is a fast-developing company in supplying industrial automation components. We offer 50+ automation equipment brands. We can arrange the fastest delivery for you. When purchasing from our company, you receive quality products at low prices. We always meet delivery deadlines. We want your business to develop, improve and flourish.
Comments
No comments yet