Pepperl+Fuchs FI-PFH-NS0137-R
HART Termination Board
- Connection board for K-System HART Multiplexer
- 16-channel
- Interface for series connection or parallel connection
- Integrated, switchable 220 Omega- resistor
Item Number:
FI-PFH-NS0137-R
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Electromagnetic compatibilityNE 21:2012
For further information see system description.
| DIP switch | selection of operating mode: - ON: without load resistor - OFF: with load resistor |
| Storage temperature | -15 ... 50 В°C (5 ... 122 В°F) |
| Rated current | max. 30 mA per channel |
| Vibration resistance | EN 60068-2-6 |
| Core cross-section | screw terminals: 0.25 ... 1.5 mm2 (24 ... 16 AWG) |
| Degree of protection | IEC 60529:2001 |
| Vibration resistance | 1 g , 10 ... 150 Hz |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Degree of protection | IP20 |
| Load resistor | 220 andOmega; , switchable on |
| Dimensions | 110 x 125 x 67 mm (4.3 x 4.9 x 2.6 inch) |
| Certificate | PF 11 CERT 1930 X |
| Shock resistance | 15 g , 11 ms |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Shock resistance | EN 60068-2-27 |
| Mass | approx. 200 g |
| Relative humidity | 93 % non-condensing |
| Factory setting | DIP switches S1 and S2: ON |
| Ambient temperature | 0 ... 50 В°C (32 ... 122 В°F) |
| Type | multiplexer connection : 26-pin NFP-26A (Yamaichi) |
| Control elements | DIP-switch |
Comments
No comments yet